Switch to using the BIT(x) macros in omap-iommu.h where
possible. This eliminates the following checkpatch check
warning:
"CHECK: Prefer using the BIT macro"
A couple of the warnings were ignored for better readability
of the bit-shift for the different values.
Signed-off-by: Suman Anna <s-a...@ti.com>
---
drivers/iommu/omap-iommu.h | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/iommu/omap-iommu.h b/drivers/iommu/omap-iommu.h
index 5b98408c18bf..a656df2f9e03 100644
--- a/drivers/iommu/omap-iommu.h
+++ b/drivers/iommu/omap-iommu.h
@@ -13,6 +13,8 @@
#ifndef _OMAP_IOMMU_H
#define _OMAP_IOMMU_H
+#include <linux/bitops.h>
+
#define for_each_iotlb_cr(obj, n, __i, cr) \
for (__i = 0; \
(__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \
@@ -96,11 +98,11 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct
device *dev)
* MMU Register bit definitions
*/
/* IRQSTATUS & IRQENABLE */
-#define MMU_IRQ_MULTIHITFAULT (1 << 4)
-#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
-#define MMU_IRQ_EMUMISS (1 << 2)
-#define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
-#define MMU_IRQ_TLBMISS (1 << 0)
+#define MMU_IRQ_MULTIHITFAULT BIT(4)
+#define MMU_IRQ_TABLEWALKFAULT BIT(3)
+#define MMU_IRQ_EMUMISS BIT(2)
+#define MMU_IRQ_TRANSLATIONFAULT BIT(1)
+#define MMU_IRQ_TLBMISS BIT(0)
#define __MMU_IRQ_FAULT \
(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
@@ -112,16 +114,16 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct
device *dev)
/* MMU_CNTL */
#define MMU_CNTL_SHIFT 1
#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
-#define MMU_CNTL_EML_TLB (1 << 3)
-#define MMU_CNTL_TWL_EN (1 << 2)
-#define MMU_CNTL_MMU_EN (1 << 1)
+#define MMU_CNTL_EML_TLB BIT(3)
+#define MMU_CNTL_TWL_EN BIT(2)
+#define MMU_CNTL_MMU_EN BIT(1)
/* CAM */
#define MMU_CAM_VATAG_SHIFT 12
#define MMU_CAM_VATAG_MASK \
((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
-#define MMU_CAM_P (1 << 3)
-#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_P BIT(3)
+#define MMU_CAM_V BIT(2)
#define MMU_CAM_PGSZ_MASK 3
#define MMU_CAM_PGSZ_1M (0 << 0)
#define MMU_CAM_PGSZ_64K (1 << 0)
@@ -134,9 +136,9 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct
device *dev)
((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
#define MMU_RAM_ENDIAN_SHIFT 9
-#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_MASK BIT(MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG BIT(MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ELSZ_SHIFT 7
#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
@@ -145,7 +147,7 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct
device *dev)
#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_MIXED_SHIFT 6
-#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED_MASK BIT(MMU_RAM_MIXED_SHIFT)
#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
#define MMU_GP_REG_BUS_ERR_BACK_EN 0x1
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
