The card detect GPIO is using IRQ_TYPE_LEVEL_LOW in the GPIO flag cells
but this defined constant is meant to be used for a IRQ and not a GPIO.
So instead use GPIO_ACTIVE_LOW that seems to be the original intention.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 46f88f86a50b..57d7c93cc72b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
};
&mmc1 {
- cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
