Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/twl6030_omap4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi
b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c42b..e373f59cea9c 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
&omap4_pmx_wkup {
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 (PIN_OUTPUT | MUX_MODE2) /*
fref_clk0_out.sys_drm_msecure */
+ OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)
/* fref_clk0_out.sys_drm_msecure */
>;
};
};
@@ -32,7 +32,7 @@
&omap4_pmx_core {
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
/* sys_nirq1.sys_nirq1 */
+ OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP |
MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
