add support for the am335x based shc board.
UART: 0-2 and 4
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0 @ 26 MHz
OMAP SD/MMC: 1 @ 26 MHz
I2C: at24 eeprom, pcf8563
USB: USB1 (host)
Signed-off-by: Heiko Schocher <h...@denx.de>
---
The following patches are needed to get all working
for the shc board:
- disable clkout on pcf8563
accepted.
http://www.spinics.net/lists/devicetree/msg98542.html
- leds: leds-gpio: add shutdown function
accepted.
https://lkml.org/lkml/2015/10/13/169
- net: phy: smsc: disable energy detect mode
accepted
[PATCH v2 2/2] net: phy: smsc: disable energy detect mode
https://lkml.org/lkml/2015/10/17/2
[PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
https://lkml.org/lkml/2015/10/17/4
- ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
@Dave: What is the current state of this patch?
I have the same problem here on this am335x based board
- [PATCH v2] regulator: tps65217: remove tps65217.dtsi file
http://www.kernelhub.org/?msg=868907&p=2
- bootlog and automated tests:
http://xeidos.ddns.net/buildbot/waterfall
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/am335x-shc.dts | 577 +++++++++++++++++++++++++++++++++++++++
2 files changed, 579 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/am335x-shc.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..65d750f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -466,7 +466,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-pepper.dtb \
am335x-lxm.dtb \
am335x-chiliboard.dtb \
- am335x-wega-rdk.dtb
+ am335x-wega-rdk.dtb \
+ am335x-shc.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 0000000..c2aceea
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,577 @@
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <h...@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Bosch SHC";
+ compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+ aliases {
+ mmcblk0 = &mmc1;
+ mmcblk1 = &mmc2;
+ };
+
+ cpus {
+ cpu@0 {
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 594000 1225000
+ 294000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ back_button {
+ label = "Back Button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_BACK>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+
+ front_button {
+ label = "Front Button";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_FRONT>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "shc:power:red";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "shc:power:bl";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ led@3 {
+ label = "shc:lan:red";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "shc:lan:bl";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "shc:cloud:red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "shc:cloud:bl";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vmmcsd_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
+
+&epwmss1 {
+ status = "okay";
+
+ ehrpwm1: ehrpwm@48302200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+ status = "okay";
+ };
+};
+
+&gpio1 {
+ hmtc_rst {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_reset";
+ };
+
+ hmtc_prog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_program";
+ };
+};
+
+&gpio3 {
+ zgb_rst {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "zigbee_reset";
+ };
+
+ zgb_boot {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "zigbee_boot";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c32";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+ slaves = <1>;
+ cpsw_emac0: slave@4a100200 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+ phy-handle = <ðernetphy0>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ max-frequency = <26000000>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ bus-width = <4>;
+ cap-power-off-card;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ ti,no-init;
+};
+
+&sham {
+ status = "okay";
+};
+
+&tps {
+ compatible = "ti,tps65217";
+ ti,pmic-shutdown-controller;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-name = "vdds_dpr";
+ regulator-compatible = "dcdc1";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ /*
+ * VDD_MPU voltage limits 0.95V - 1.26V with
+ * +/-4% tolerance
+ */
+ regulator-compatible = "dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <70000>;
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ /*
+ * VDD_CORE voltage limits 0.95V - 1.1V with
+ * +/-4% tolerance
+ */
+ regulator-name = "vdd_core";
+ regulator-compatible = "dcdc3";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-name = "vio,vrtc,vdds";
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-name = "vdd_3v3aux";
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-name = "vdd_1v8";
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-name = "vdd_3v3a";
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
+ 0x1b4 (PIN_INPUT | MUX_MODE6)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ ehrpwm1_pins: pinmux_ehrpwm1 {
+ pinctrl-single,pins = <
+ 0x4c (PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT | MUX_MODE2)
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2)
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1)
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1)
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT | MUX_MODE0)
+ 0x18c (PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE5)
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ 0x30 (PIN_INPUT | MUX_MODE3)
+ 0x34 (PIN_INPUT | MUX_MODE3)
+ 0x38 (PIN_INPUT | MUX_MODE3)
+ 0x3c (PIN_INPUT | MUX_MODE3)
+ 0x88 (PIN_INPUT | MUX_MODE3)
+ 0x8c (PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x168 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x16c (PIN_OUTPUT | MUX_MODE0)
+ 0x170 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x174 (PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1 {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE0)
+ 0x17C (PIN_OUTPUT | MUX_MODE0)
+ 0x180 (PIN_INPUT | MUX_MODE0)
+ 0x184 (PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT | MUX_MODE1)
+ 0x154 (PIN_OUTPUT | MUX_MODE1)
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE6)
+ 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE6)
+ >;
+ };
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ 0x20 (PIN_OUTPUT | MUX_MODE7)
+ 0x24 (PIN_OUTPUT | MUX_MODE7)
+ 0x28 (PIN_OUTPUT | MUX_MODE7)
+ 0x2c (PIN_OUTPUT | MUX_MODE7)
+ 0x40 (PIN_OUTPUT | MUX_MODE7)
+ 0x44 (PIN_OUTPUT | MUX_MODE7)
+ 0x48 (PIN_OUTPUT | MUX_MODE7)
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_OUTPUT | MUX_MODE7)
+ 0x58 (PIN_OUTPUT | MUX_MODE7)
+ 0x5c (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x60 (PIN_INPUT | MUX_MODE7)
+ 0x64 (PIN_INPUT | MUX_MODE7)
+ 0x68 (PIN_INPUT | MUX_MODE7)
+ 0x6c (PIN_INPUT | MUX_MODE7)
+ 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x7c (PIN_INPUT | MUX_MODE7)
+ 0x90 (PIN_OUTPUT | MUX_MODE7)
+ 0x94 (PIN_INPUT | MUX_MODE7)
+ 0x98 (PIN_OUTPUT | MUX_MODE7)
+ 0x9c (PIN_OUTPUT | MUX_MODE7)
+ 0xa0 (PIN_OUTPUT | MUX_MODE7)
+ 0xa4 (PIN_OUTPUT | MUX_MODE7)
+ 0xa8 (PIN_OUTPUT | MUX_MODE7)
+ 0xac (PIN_OUTPUT | MUX_MODE7)
+ 0xb0 (PIN_OUTPUT | MUX_MODE7)
+ 0xb4 (PIN_OUTPUT | MUX_MODE7)
+ 0xb8 (PIN_OUTPUT | MUX_MODE7)
+ 0xbc (PIN_OUTPUT | MUX_MODE7)
+ 0xc0 (PIN_OUTPUT | MUX_MODE7)
+ 0xc4 (PIN_OUTPUT | MUX_MODE7)
+ 0xc8 (PIN_OUTPUT | MUX_MODE7)
+ 0xcc (PIN_OUTPUT | MUX_MODE7)
+ 0xd0 (PIN_OUTPUT | MUX_MODE7)
+ 0xd4 (PIN_OUTPUT | MUX_MODE7)
+ 0xd8 (PIN_OUTPUT | MUX_MODE7)
+ 0xdc (PIN_OUTPUT | MUX_MODE7)
+ 0xe0 (PIN_OUTPUT | MUX_MODE7)
+ 0xe4 (PIN_OUTPUT | MUX_MODE7)
+ 0xe8 (PIN_OUTPUT | MUX_MODE7)
+ 0xec (PIN_OUTPUT | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x158 (PIN_OUTPUT | MUX_MODE7)
+ 0x15c (PIN_OUTPUT | MUX_MODE7)
+ 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x1a0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ 0x1a4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1ac (PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
