Sonasath, Moiz wrote:
When an XRDY/XDR is hit, wait for XUDF before writing data to DATA_REG.
Otherwise some data bytes can be lost while transferring them from the
memory to the I2C interface.

Do a Busy-wait for XUDF, before writing data to DATA_REG. While waiting
if there is NACK | AL, set the appropriate error flags, ack the pending
interrupts and return from the ISR.

Signed-off-by: Moiz Sonasath<m-sonas...@ti.com>
Signed-off-by: Vikram Pandita<vikram.pand...@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   24 +++++++++++++++++++++++-
 1 files changed, 23 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 05b5e4c..8deaf87 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -672,9 +672,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
                        break;
                }
+ err = 0;
+complete:
cant we rename this label?
                omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
- err = 0;
                if (stat & OMAP_I2C_STAT_NACK) {
                        err |= OMAP_I2C_STAT_NACK;
                        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -764,6 +765,27 @@ omap_i2c_isr(int this_irq, void *dev_id)
                                                        "data to send\n");
                                        break;
                                }
+
+                               /*
+                                * OMAP3430 Errata 1.153: When an XRDY/XDR
+                                * is hit, wait for XUDF before writing data
+                                * to DATA_REG. Otherwise some data bytes can
+                                * be lost while transferring them from the
+                                * memory to the I2C interface.
+                                */
+
+                               if (cpu_is_omap34xx()) {
+                                               while (!(stat & 
OMAP_I2C_STAT_XUDF)) {
+                                                       if (stat & 
(OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+                                                               
omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
generic comment - code nesting is getting overwhelming - we may like to refactor the isr function at a later date I think..
+                                                               err |= 
OMAP_I2C_STAT_XUDF;
why set the err if we wantedly force this to happen?
+                                                               goto complete;

+                                                       }
+                                                       cpu_relax();
+                                                       stat = 
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+                                               }
this is an infinite while loop + it tries to handle error cases - essentially do another isr routine inside itself.


How about:
Apply [1] and the following?
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ad8d201..e3f21af 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -728,6 +728,12 @@ omap_i2c_isr(int this_irq, void *dev_id)
                }
                if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
                        u8 num_bytes = 1;
+                       if (cpu_is_omap34xx() &&
+                               !(stat & OMAP_I2C_STAT_XUDF)){
+                               cpu_relax();
+                               continue;
+                       }
+
                        if (dev->fifo_size) {
                                if (stat & OMAP_I2C_STAT_XRDY)
                                        num_bytes = dev->fifo_size;


Regards,
Nishanth Menon
Ref:
[1] http://patchwork.kernel.org/patch/32332/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to