The usb regulator supplies (usb1v5, usb1v8 & usb3v1) must be available
before adding the twl4030_usb child, else twl4030_usb_ldo_init() will
always fail thus causing boot lock-up.
This patch fixes boot on OMAP systems using the twl4030 usb transceiver.
CONFIG_TWL4030_USB=y
Signed-off-by: Roger Quadros <ext-roger.quad...@nokia.com>
---
drivers/mfd/twl4030-core.c | 89 ++++++++++++++++++++++---------------------
1 files changed, 46 insertions(+), 43 deletions(-)
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e424cf6..e832e97 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -480,7 +480,6 @@ static int
add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
- struct device *usb_transceiver = NULL;
if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
child = add_child(3, "twl4030_bci",
@@ -532,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata,
unsigned long features)
}
if (twl_has_usb() && pdata->usb) {
+
+ static struct regulator_consumer_supply usb1v5 = {
+ .supply = "usb1v5",
+ };
+ static struct regulator_consumer_supply usb1v8 = {
+ .supply = "usb1v8",
+ };
+ static struct regulator_consumer_supply usb3v1 = {
+ .supply = "usb3v1",
+ };
+
+ /* First add the regulators so that they can be used by transceiver */
+ if (twl_has_regulator()) {
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V5,
+ &usb_fixed, &usb1v5, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V8,
+ &usb_fixed, &usb1v8, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB3V1,
+ &usb_fixed, &usb3v1, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ }
+
child = add_child(0, "twl4030_usb",
pdata->usb, sizeof(*pdata->usb),
true,
/* irq0 = USB_PRES, irq1 = USB */
pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+
if (IS_ERR(child))
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
- usb_transceiver = child;
+ if (twl_has_regulator() && child) {
+ usb1v5.dev = child;
+ usb1v8.dev = child;
+ usb3v1.dev = child;
+ }
}
if (twl_has_watchdog()) {
@@ -580,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned
long features)
return PTR_ERR(child);
}
- if (twl_has_regulator() && usb_transceiver) {
- static struct regulator_consumer_supply usb1v5 = {
- .supply = "usb1v5",
- };
- static struct regulator_consumer_supply usb1v8 = {
- .supply = "usb1v8",
- };
- static struct regulator_consumer_supply usb3v1 = {
- .supply = "usb3v1",
- };
-
- /* this is a template that gets copied */
- struct regulator_init_data usb_fixed = {
- .constraints.valid_modes_mask =
- REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .constraints.valid_ops_mask =
- REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- };
-
- usb1v5.dev = usb_transceiver;
- usb1v8.dev = usb_transceiver;
- usb3v1.dev = usb_transceiver;
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
- &usb1v5, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
- &usb1v8, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
- &usb3v1, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
/* maybe add LDOs that are omitted on cost-reduced parts */
if (twl_has_regulator() && !(features & TPS_SUBSET)) {
child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
