[PATCH 10/23] omap3: Add platform init code for EHCI driver on IGEP v2

[Tony Lindgren]

From: Enric Balletbo i Serra <eballe...@iseebcn.com>

Add platform init code for EHCI driver on IGEP v2

Signed-off-by: Enric Balletbo i Serra <eballe...@iseebcn.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
 arch/arm/mach-omap2/board-igep0020.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c 
b/arch/arm/mach-omap2/board-igep0020.c
index 71488b2..f6102c7 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -213,6 +213,17 @@ static int __init igep2_i2c_init(void)
        return 0;
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+       .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+       .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+       .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+       .phy_reset = true,
+       .reset_gpio_port[0] = -EINVAL,
+       .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+       .reset_gpio_port[2] = -EINVAL,
+};
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
        { .reg_offset = OMAP_MUX_TERMINATOR },
@@ -227,6 +238,7 @@ static void __init igep2_init(void)
        igep2_i2c_init();
        omap_serial_init();
        usb_musb_init();
+       usb_ehci_init(&ehci_pdata);
 
        igep2_init_smsc911x();
 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html