Hi, While compiling for omap3_evm_defconfig, at the head of linux-omap, I encounter these errors:
arch/arm/mach-omap2/built-in.o: In function `sr_configure_vp': /home/premi/linux-pm/arch/arm/mach-omap2/smartreflex.c:315: undefined reference to `omap_twl_uv_to_vsel' /home/premi/linux-pm/arch/arm/mach-omap2/smartreflex.c:364: undefined reference to `omap_twl_uv_to_vsel' arch/arm/mach-omap2/built-in.o: In function `sr_enable': /home/premi/linux-pm/arch/arm/mach-omap2/smartreflex.c:609: undefined reference to `omap_twl_uv_to_vsel' arch/arm/mach-omap2/built-in.o: In function `sr_reset_voltage': /home/premi/linux-pm/arch/arm/mach-omap2/smartreflex.c:478: undefined reference to `omap_twl_uv_to_vsel' /home/premi/linux-pm/arch/arm/mach-omap2/smartreflex.c:496: undefined reference to `omap_twl_uv_to_vsel' make: *** [.tmp_vmlinux1] Error 1 Turn our that comment and code in plat-omap/Makefile don't match: # OPP support in (OMAP3+ only at the moment) # XXX The OPP TWL/TPS code should only be included when a TWL/TPS # PMIC is selected. ifdef CONFIG_CPU_FREQ obj-$(CONFIG_ARCH_OMAP3) += opp.o opp_twl_tps.o endif But changing CONFIG_CPU_FREQ to CONFIG_TWL4030_POWER leads to these errors: CC arch/arm/plat-omap/opp.o arch/arm/plat-omap/opp.c:54: error: redefinition of 'opp_get_voltage' arch/arm/plat-omap/include/plat/opp.h:240: error: previous definition of 'opp_get_voltage' was here arch/arm/plat-omap/opp.c:63: error: redefinition of 'opp_get_freq' arch/arm/plat-omap/include/plat/opp.h:245: error: previous definition of 'opp_get_freq' was here arch/arm/plat-omap/opp.c:79: error: conflicting types for 'opp_find_by_opp_id' arch/arm/plat-omap/include/plat/opp.h:296: error: previous definition of 'opp_find_by_opp_id' was here arch/arm/plat-omap/opp.c:102: error: redefinition of 'opp_get_opp_id' arch/arm/plat-omap/include/plat/opp.h:301: error: previous definition of 'opp_get_opp_id' was here arch/arm/plat-omap/opp.c:107: error: conflicting types for 'opp_get_opp_count' arch/arm/plat-omap/include/plat/opp.h:250: error: previous definition of 'opp_get_opp_count' was here arch/arm/plat-omap/opp.c:129: error: conflicting types for 'opp_find_freq_exact' arch/arm/plat-omap/include/plat/opp.h:256: error: previous definition of 'opp_find_freq_exact' was here arch/arm/plat-omap/opp.c:153: error: conflicting types for 'opp_find_freq_ceil' arch/arm/plat-omap/include/plat/opp.h:268: error: previous definition of 'opp_find_freq_ceil' was here arch/arm/plat-omap/opp.c:182: error: conflicting types for 'opp_find_freq_floor' arch/arm/plat-omap/include/plat/opp.h:262: error: previous definition of 'opp_find_freq_floor' was here arch/arm/plat-omap/opp.c:223: error: conflicting types for 'opp_add' arch/arm/plat-omap/include/plat/opp.h:280: error: previous definition of 'opp_add' was here arch/arm/plat-omap/opp.c:291: error: conflicting types for 'opp_init_list' arch/arm/plat-omap/include/plat/opp.h:274: error: previous definition of 'opp_init_list' was here arch/arm/plat-omap/opp.c:335: error: redefinition of 'opp_enable' arch/arm/plat-omap/include/plat/opp.h:285: error: previous definition of 'opp_enable' was here arch/arm/plat-omap/opp.c:345: error: redefinition of 'opp_disable' arch/arm/plat-omap/include/plat/opp.h:290: error: previous definition of 'opp_disable' was here arch/arm/plat-omap/opp.c:356: error: conflicting types for 'opp_init_cpufreq_table' arch/arm/plat-omap/include/plat/opp.h:307: error: previous definition of 'opp_init_cpufreq_table' was here make[1]: *** [arch/arm/plat-omap/opp.o] Error 1 The contents of "plat-omap/include/plat/opp.h" seem to be based on assumption that definition of OPP is needed only for cpufreq. But even if cpufreq is disabled, this information is required for setting the correct voltage against 'pre-defined' ARM frequency. Questions/ comments: 1) The linkage between OPP and Voltage are not driven by the PMIC. They are defined by/for the silicon itself. 2) The implementation for setting the voltage should depend upon the PMIC. 3) Was there any specific need to tie the functions "opp_get_voltage" and others to cpufreq only? I am working on a patch that should remove some of these dependencies. But, trying to open up a discussion as well... Best regards, Sanjeev -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
