* Robert Nelson <robertcnel...@gmail.com> [100816 17:29]:
> Due to the omap3530 ES3.0 Silicon being used on both the
> B5/B6 and C1/2/3 Beagle we can't use the cpu_is_omap34xx()
> routines to differentiate the Beagle Boards.
>
> However gpio pins 171,172,173 where setup for this prupose, so
> lets use them.
>
> Changes:
> for older U-Boot's, use omap_mux_init_gpio()
> keep Beagle Rev in board-omap3beagle.c
>
> Tested on Beagle Revisions: B5, C2, C4, and xMA
Looks good, just one minor comment below.
> Signed-off-by: Robert Nelson <robertcnel...@gmail.com>
> Cc: Jarkko Nikula <jhnik...@gmail.com>
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 79
> +++++++++++++++++++++++++++++++
> 1 files changed, 79 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index 87969c7..01a288f 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -50,6 +50,84 @@
>
> #define NAND_BLOCK_SIZE SZ_128K
>
> +/*
> + * OMAP3 Beagle revision
> + * Run time detection of Beagle revision is done by reading GPIO.
> + * GPIO ID -
> + * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
> + * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
> + * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
> + * XM = GPIO173, GPIO172, GPIO171: 0 0 0
> + */
> +enum {
> + OMAP3BEAGLE_BOARD_AXBX = 0,
> + OMAP3BEAGLE_BOARD_C1_3,
> + OMAP3BEAGLE_BOARD_C4,
> + OMAP3BEAGLE_BOARD_XM,
> +};
> +
> +static u8 omap3_beagle_version;
> +
> +u8 get_omap3_beagle_rev(void)
> +{
> + return omap3_beagle_version;
> +}
Please make this static u8 get_omap3_beagle_rev().
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
