From: Kevin Hilman <khil...@deeprootsystems.com>
Since the UART enable/idle is done during the idle path (with
interrupts disabled), use the non-locking versions of the hwmod
enable/idle functions.
Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com>
---
arch/arm/mach-omap2/serial.c | 23 +++++++++++++++++++++--
1 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b47194a..f03014f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -105,10 +105,29 @@ struct omap_uart_state {
static LIST_HEAD(uart_list);
static u8 num_uarts;
+/*
+ * Since these idle/enable hooks are used in the idle path itself
+ * which has interrupts disabled, use the non-locking versions of
+ * the hwmod enable/disable functions.
+ */
+static int uart_idle_hwmod(struct omap_device *od)
+{
+ _omap_hwmod_idle(od->hwmods[0]);
+
+ return 0;
+}
+
+static int uart_enable_hwmod(struct omap_device *od)
+{
+ _omap_hwmod_enable(od->hwmods[0]);
+
+ return 0;
+}
+
static struct omap_device_pm_latency omap_uart_latency[] = {
{
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
+ .deactivate_func = uart_idle_hwmod,
+ .activate_func = uart_enable_hwmod,
.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
};
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
