VMMC2 regulator is configured but it's not used for the IGEP v2, so
remove this regulator from board.

Signed-off-by: Enric Balletbo i Serra <eballe...@gmail.com>
---
 arch/arm/mach-omap2/board-igep0020.c |   26 +++-----------------------
 1 files changed, 3 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c 
b/arch/arm/mach-omap2/board-igep0020.c
index c5eaa43..fa450b1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -260,10 +260,6 @@ static struct regulator_consumer_supply igep2_vmmc1_supply 
= {
        .supply         = "vmmc",
 };
 
-static struct regulator_consumer_supply igep2_vmmc2_supply = {
-       .supply         = "vmmc",
-};
-
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
        .constraints = {
@@ -279,21 +275,6 @@ static struct regulator_init_data igep2_vmmc1 = {
        .consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
-static struct regulator_init_data igep2_vmmc2 = {
-       .constraints = {
-               .min_uV                 = 1850000,
-               .max_uV                 = 3150000,
-               .valid_modes_mask       = REGULATOR_MODE_NORMAL
-                                       | REGULATOR_MODE_STANDBY,
-               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
-                                       | REGULATOR_CHANGE_MODE
-                                       | REGULATOR_CHANGE_STATUS,
-       },
-       .num_consumer_supplies  = 1,
-       .consumer_supplies      = &igep2_vmmc2_supply,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
        {
                .mmc            = 1,
@@ -390,11 +371,11 @@ static int igep2_twl_gpio_setup(struct device *dev,
        mmc[0].gpio_cd = gpio + 0;
        omap2_hsmmc_init(mmc);
 
-       /* link regulators to MMC adapters ... we "know" the
+       /*
+        * link regulators to MMC adapters ... we "know" the
         * regulators will be set up only *after* we return.
-       */
+        */
        igep2_vmmc1_supply.dev = mmc[0].dev;
-       igep2_vmmc2_supply.dev = mmc[1].dev;
 
        /*
         * REVISIT: need ehci-omap hooks for external VBUS
@@ -534,7 +515,6 @@ static struct twl4030_platform_data igep2_twldata = {
        .codec          = &igep2_codec_data,
        .gpio           = &igep2_twl4030_gpio_pdata,
        .vmmc1          = &igep2_vmmc1,
-       .vmmc2          = &igep2_vmmc2,
        .vpll2          = &igep2_vpll2,
 
 };
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to