* David Anders <x0132...@ti.com> [101006 14:06]:
> Adding card detect callback function and card detect configuration
> function for MMC1 Controller.

This one would be best merged into this patch from Kishore:

https://patchwork.kernel.org/patch/189952/

Kishore, care to update your patch with this one and then send
the updated version to Samuel? I think there may have been some
other pending comments too.

The other three look OK to me to queue.

Regards,

Tony

> 
> Signed-off-by: David Anders <x0132...@ti.com>
> Signed-off-by: Anand Gadiyar <gadi...@ti.com>
> ---
> 
> patch depends on https://patchwork.kernel.org/patch/189952/
> 
>  arch/arm/mach-omap2/board-omap4panda.c |    7 ++++++-
>  1 files changed, 6 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c 
> b/arch/arm/mach-omap2/board-omap4panda.c
> index 697c0bd..94e819c 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -77,9 +77,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device 
> *dev)
>       struct omap_mmc_platform_data *pdata = dev->platform_data;
>  
>       /* Setting MMC1 Card detect Irq */
> -     if (pdev->id == 0)
> +     if (pdev->id == 0) {
> +             ret = twl6030_mmc_card_detect_config();
> +             if (ret)
> +                     pr_err("Failed configuring MMC1 card detect\n");
>               pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
>                                               MMCDETECT_INTR_OFFSET;
> +             pdata->slots[0].card_detect = twl6030_mmc_card_detect;
> +     }
>       return ret;
>  }
>  
> -- 
> 1.7.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to