This patch will kill following section mismatch warnings:
WARNING: vmlinux.o(.text+0x24a00): Section mismatch in reference from the
function zoom_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function zoom_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because zoom_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.
WARNING: vmlinux.o(.text+0x24bfc): Section mismatch in reference from the
function cm_t35_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function cm_t35_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because cm_t35_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.
WARNING: vmlinux.o(.data+0x1d3e0): Section mismatch in reference from the
variable h4_config to the (unknown reference) .init.data:(unknown)
The variable h4_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x1dc08): Section mismatch in reference from the
variable sdp2430_config to the (unknown reference) .init.data:(unknown)
The variable sdp2430_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x1e1d8): Section mismatch in reference from the
variable apollon_config to the (unknown reference) .init.data:(unknown)
The variable apollon_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
Signed-off-by: Bryan Wu <bryan...@canonical.com>
Cc: Paul Walmsley <p...@pwsan.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 2 +-
arch/arm/mach-omap2/board-cm-t35.c | 11 +++--------
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +-
5 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c
b/arch/arm/mach-omap2/board-2430sdp.c
index b527f8d..9ab8bb1 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -135,7 +135,7 @@ static inline void board_smc91x_init(void)
#endif
-static struct omap_board_config_kernel sdp2430_config[] = {
+static struct omap_board_config_kernel sdp2430_config[] __initdata = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
diff --git a/arch/arm/mach-omap2/board-apollon.c
b/arch/arm/mach-omap2/board-apollon.c
index 2c6db1a..5c432d8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -270,7 +270,7 @@ static struct omap_lcd_config apollon_lcd_config __initdata
= {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel apollon_config[] = {
+static struct omap_board_config_kernel apollon_config[] __initdata = {
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c
b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..cd97159 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -600,8 +600,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata
__initdata = {
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
+ .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
.reset_gpio_port[2] = -EINVAL
};
@@ -630,12 +630,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev,
unsigned gpio,
cm_t35_vmmc1_supply.dev = mmc[0].dev;
cm_t35_vsim_supply.dev = mmc[0].dev;
- /* setup USB with proper PHY reset GPIOs */
- ehci_pdata.reset_gpio_port[0] = gpio + 6;
- ehci_pdata.reset_gpio_port[1] = gpio + 7;
-
- usb_ehci_init(&ehci_pdata);
-
return 0;
}
@@ -805,6 +799,7 @@ static void __init cm_t35_init(void)
cm_t35_init_display();
usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 929993b..5549f2c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -283,7 +283,7 @@ static struct omap_usb_config h4_usb_config __initdata = {
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
-static struct omap_board_config_kernel h4_config[] = {
+static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_LCD, &h4_lcd_config },
};
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c
b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b21..9b79188 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -196,7 +196,7 @@ struct wl12xx_platform_data omap_zoom_wlan_data __initdata
= {
.board_ref_clock = 1,
};
-static struct omap2_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] = {
{
.name = "external",
.mmc = 1,
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
