On 12/9/2010 11:19 PM, Kevin Hilman wrote:
"Cousson, Benoit"<b-cous...@ti.com> writes:
Salut Kevin,
On 12/9/2010 8:18 PM, Kevin Hilman wrote:
Hi Charu,
"Varadarajan, Charulatha"<ch...@ti.com> writes:
Prepare for implementing GPIO as a platform driver.
Modifies omap_gpio_init() to make use of omap_gpio_chip_init()
and omap_gpio_mod_init(). omap_gpio_mod_init() does the module init
by clearing the status register and initializing the GPIO control register.
omap_gpio_chip_init() initializes the chip request, free, get, set and
other function pointers and sets the gpio irq handler.
This is only to reorganize the code so that the "omap gpio platform driver
implementation patch" looks cleaner and better to review.
Signed-off-by: Charulatha V<ch...@ti.com>
I just noticed while testing on 36xx/Zoom3 that GPIO wakeups are no
longer working after this series.
The problem seems to be that for OMAP2+, this series removed manual
SYSCONFIG register setting in favor of using omap_hwmod (which is good),
however some of the SYSCONFIG values, specifically, in the current code,
the ENAWAKEUP bit was set in each bank, but this is no longer the
default with omap_hwmod.
That part is strange, because Rajendra did a patch to enable the
wakeup bit during _omap_hwmod_enable as soon as the idlemode is set to
smartidle.
/* If slave port is in SMARTIDLE, also enable wakeup */
if ((sf& SYSC_HAS_SIDLEMODE)&& (s_idlemode == HWMOD_IDLEMODE_SMART))
_enable_wakeup(oh);
The _disable_wakeup is never called, so in theory once it is set, it
should remain enabled.
Does that mean that this the GPIO is not in smartidle anymore in your case?
Looks like a bug in the patch that added automatic wakeup enables.
Basically, wakeups are enabled, but are promptly disabled if
SYSC_HAS_AUTOIDLE. Here's the code:
/*
* XXX The clock framework should handle this, by
* calling into this code. But this must wait until the
* clock structures are tagged with omap_hwmod entries
*/
if ((oh->flags& HWMOD_SET_DEFAULT_CLOCKACT)&&
(sf& SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact,&v);
_write_sysconfig(v, oh);
OK, so here, 'v' has wakeups disabled.
/* If slave is in SMARTIDLE, also enable wakeup */
if ((sf& SYSC_HAS_SIDLEMODE)&& !(oh->flags& HWMOD_SWSUP_SIDLE))
_enable_wakeup(oh);
Here we enabled them directly in SYSC (but 'v' is not updated)
/*
* Set the autoidle bit only after setting the smartidle bit
* Setting this will not have any impact on the other modules.
*/
if (sf& SYSC_HAS_AUTOIDLE) {
idlemode = (oh->flags& HWMOD_NO_OCP_AUTOIDLE) ?
0 : 1;
_set_module_autoidle(oh, idlemode,&v);
_write_sysconfig(v, oh);
}
And here, SYSCONFIG is updated again using 'v', which does not have
wakeups enabled.
A quick patch (below) shows that if I update 'v' after enabling wakeups,
the problem is fixed.
I'll cook up a cleaner patch for this, but I think the solution is
probably to change _enable_wakeup() to take the 'v' argument and modify
it instead of directly writing SYSCONFIG. That will make it more like
all the other helper functions.
Funny, I did a patch that does that yesterday just because the wakeup
enable on some OMAP4 IPs does require changing the idlemode as well.
So I added a new _set_enawakeup API to use the same programming model.
+static int _set_enawakeup(struct omap_hwmod *oh, u8 enawakeup, u32 *v)
{
- u32 v, wakeup_mask;
+ u32 wakeup_mask;
+ u8 wakeup_shift;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
@@ -401,10 +402,44 @@ static int _enable_wakeup(struct omap_hwmod *oh)
return -EINVAL;
}
- wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
+ wakeup_shift = oh->class->sysc->sysc_fields->enwkup_shift;
+ wakeup_mask = 0x1 << wakeup_shift;
+
+ *v &= ~wakeup_mask;
+ *v |= enawakeup << wakeup_shift;
+
+ return 0;
+}
+
That does not solve the issue I was trying to fix with the McPDM driver,
that's why I didn't send it yet, but that might be enough for the GPIO.
Regards,
Benoit
Kevin
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 12856eb..adcb1fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -791,8 +791,10 @@ static void _enable_sysc(struct omap_hwmod *oh)
_write_sysconfig(v, oh);
/* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf& SYSC_HAS_SIDLEMODE)&& !(oh->flags& HWMOD_SWSUP_SIDLE))
+ if ((sf& SYSC_HAS_SIDLEMODE)&& !(oh->flags& HWMOD_SWSUP_SIDLE)) {
_enable_wakeup(oh);
+ v = oh->_sysc_cache;
+ }
/*
* Set the autoidle bit only after setting the smartidle bit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
