While trying out V3.0-rc1, I noticed couple of regressions. Am
posting this in case anybody come across same issues.
1.OMAP MMC code keep throwing "Pbias Voltage is not same as LDO" error
continuously.
Balaji is planning post right fix for the same, but just
in case you get around this issue,
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b2f30be..94ae400 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device
*dev, int slot,
int power_on, int vdd)
{
u32 reg;
+ unsigned long timeout;
if (power_on) {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
@@ -158,7 +159,14 @@ static void omap4_hsmmc1_after_set_reg(struct
device *dev, int slot,
OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
/* 4 microsec delay for comparator to generate an error*/
- udelay(4);
+ timeout = jiffies + msecs_to_jiffies(500);
+ do {
+ reg = omap4_ctrl_pad_readl(control_pbias_offset);
+ if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+ break;
+ mdelay(1);
+ } while (!time_after(jiffies, timeout));
+
reg = omap4_ctrl_pad_readl(control_pbias_offset);
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
2. can't open /dev/ttyO2: No such file or directory
This is not obvious console entry missing problem in FS.
Need to look at this further.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
