On 9/8/2011 8:01 PM, Grant Likely wrote:
On Wed, Aug 24, 2011 at 03:09:07PM +0200, Benoit Cousson wrote:
Add device-tree support for the l3-noc driver.
Use platform_driver_register to defer the probing at device init
time.
Signed-off-by: Benoit Cousson<b-cous...@ti.com>
Cc: Tony Lindgren<t...@atomide.com>
Cc: Santosh Shilimkar<santosh.shilim...@ti.com>
---
arch/arm/mach-omap2/omap_l3_noc.c | 16 ++++++++++++++--
1 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c
b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f190..4630703 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -228,16 +228,28 @@ static int __exit omap4_l3_remove(struct platform_device
*pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "arteris,noc", },
Missing documentation for this compatible property.
As you already figured out... it will come later.
Also, it appears
to be rather on the generic side.
It is indeed a generic IP that will be there on OMAP5 too.
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
+ .probe = omap4_l3_probe,
.probe needs to be put into the __devinit section.
.remove = __exit_p(omap4_l3_remove),
Similarly, at the same time the remove hook should be changed to
__devexit and __devexit_p() at the same time.
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .of_match_table = l3_noc_match,
Looks like ".owner = THIS_MODULE," is missing too.
Well, yeah, that driver was supposed to be started really early to catch
any potential bus violation. So it was clearly not targeted to be a
loadable module.
Anyway, it will not hurt, so I'll fix that.
Thanks for the review,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
