Now that we have OPP layer, and OMAP CPUfreq driver is using it, we no
longer need/use the clock framework code for filling up CPUfreq
tables. Remove it.
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 80 --------------------------
arch/arm/mach-omap2/clock.c | 5 --
arch/arm/mach-omap2/clock.h | 8 ---
3 files changed, 0 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 39f9d5a..9a13e07 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -164,83 +164,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long
rate)
return 0;
}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- const struct prcm_config *prcm;
- int i = 0;
- int tbl_sz = 0;
-
- if (!cpu_is_omap24xx())
- return;
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sclk->rate)
- continue;
-
- /* don't put bypass rates in table */
- if (prcm->dpll_speed == prcm->xtal_speed)
- continue;
-
- tbl_sz++;
- }
-
- /*
- * XXX Ensure that we're doing what CPUFreq expects for this error
- * case and the following one
- */
- if (tbl_sz == 0) {
- pr_warning("%s: no matching entries in rate_table\n",
- __func__);
- return;
- }
-
- /* Include the CPUFREQ_TABLE_END terminator entry */
- tbl_sz++;
-
- freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
- GFP_ATOMIC);
- if (!freq_table) {
- pr_err("%s: could not kzalloc frequency table\n", __func__);
- return;
- }
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sclk->rate)
- continue;
-
- /* don't put bypass rates in table */
- if (prcm->dpll_speed == prcm->xtal_speed)
- continue;
-
- freq_table[i].index = i;
- freq_table[i].frequency = prcm->mpu_speed / 1000;
- i++;
- }
-
- freq_table[i].index = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- *table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- if (!cpu_is_omap24xx())
- return;
-
- kfree(freq_table);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1f3481f..160e61c 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
- /* These will be removed when the OPP code is integrated */
- .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
- .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
-#endif
};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 48ac568..7fa20b3 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -144,14 +144,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table
**table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table
**table);
-#else
-#define omap2_clk_init_cpufreq_table 0
-#define omap2_clk_exit_cpufreq_table 0
-#endif
-
extern const struct clkops clkops_omap2_iclk_dflt_wait;
extern const struct clkops clkops_omap2_iclk_dflt;
extern const struct clkops clkops_omap2_iclk_idle_only;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
