Hi Tony,

On Fri, Sep 07, 2012 at 00:28:32, Tony Lindgren wrote:
> Request pins using pinctrl framework. Only show a warning
> on error as some boards set the pins in the bootloader
> even if CONFIG_PINCTRL is enabled.
> 
> Cc: linux-ser...@vger.kernel.org
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
> ---
>  arch/arm/plat-omap/include/plat/omap-serial.h |    1 +
>  drivers/tty/serial/omap-serial.c              |   10 ++++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h 
> b/arch/arm/plat-omap/include/plat/omap-serial.h
> index 1a52725..0f4de14 100644
> --- a/arch/arm/plat-omap/include/plat/omap-serial.h
> +++ b/arch/arm/plat-omap/include/plat/omap-serial.h
> @@ -106,6 +106,7 @@ struct uart_omap_port {
>       struct uart_port        port;
>       struct uart_omap_dma    uart_dma;
>       struct platform_device  *pdev;
> +     struct pinctrl          *pins;
>  
>       unsigned char           ier;
>       unsigned char           lcr;
> diff --git a/drivers/tty/serial/omap-serial.c 
> b/drivers/tty/serial/omap-serial.c
> index d3cda0c..068e88c 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -39,6 +39,7 @@
>  #include <linux/irq.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #include <plat/dma.h>
>  #include <plat/dmtimer.h>
> @@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device 
> *pdev)
>               goto err_port_line;
>       }
>  
> +     up->pins = pinctrl_get_select_default(&pdev->dev);
> +     if (IS_ERR(up->pins)) {
> +             dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
> +                      up->port.line, PTR_ERR(up->pins));
> +             up->pins = NULL;
> +     }
> +
>       sprintf(up->name, "OMAP UART%d", up->port.line);
>       up->port.mapbase = mem->start;
>       up->port.membase = devm_ioremap(&pdev->dev, mem->start,
> @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device 
> *dev)
>               pm_runtime_disable(&up->pdev->dev);
>               uart_remove_one_port(&serial_omap_reg, &up->port);
>               pm_qos_remove_request(&up->pm_qos_request);
> +             if (up->pins)
> +                     pinctrl_put(up->pins);

I think this can be removed if we use devm_pinctrl_get_select_default()
above.

Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to