On Mon, Aug 13, 2012 at 8:23 PM, Munegowda, Keshava <keshava_mgo...@ti.com> wrote: > On Mon, Aug 13, 2012 at 7:39 PM, Felipe Balbi <ba...@ti.com> wrote: >> On Mon, Aug 13, 2012 at 06:52:13PM +0530, Munegowda, Keshava wrote: >>> On Fri, Jul 27, 2012 at 5:44 PM, Munegowda, Keshava >>> <keshava_mgo...@ti.com> wrote: >>> > On Mon, Jul 23, 2012 at 8:04 PM, Munegowda, Keshava >>> > <keshava_mgo...@ti.com> wrote: >>> >> On Mon, Jul 23, 2012 at 7:38 PM, Felipe Balbi <ba...@ti.com> wrote: >>> >>> Hi, >>> >>> >>> >>> On Mon, Jul 23, 2012 at 07:31:10PM +0530, Munegowda, Keshava wrote: >>> >>>> On Thu, Jul 19, 2012 at 3:48 PM, Munegowda, Keshava >>> >>>> <keshava_mgo...@ti.com> wrote: >>> >>>> > On Mon, Jul 16, 2012 at 7:01 PM, Keshava Munegowda >>> >>>> > <keshava_mgo...@ti.com> wrote: >>> >>>> >> The TLL (Transceiver Less Link) is an separate IP block, >>> >>>> >> independent of >>> >>>> >> the host controller. Basically this TLL operates like USB PHY which >>> >>>> >> allows >>> >>>> >> the user to connect two USB transceiver interfaces together directly >>> >>>> >> without the use of differential transceivers in omap3 and later >>> >>>> >> chips. >>> >>>> >> The TLL configuration is removed from the UHH driver and >>> >>>> >> implemented as >>> >>>> >> a seperate platform driver. Now, the UHH driver configures the TLL >>> >>>> >> through API's exported by the TLL platform driver. >>> >>>> >> >>> >>>> >> Signed-off-by: Keshava Munegowda <keshava_mgo...@ti.com> >>> >>>> >> >>> >>>> >> In v4: >>> >>>> >> - rebased on top of linux kernel version 3.5.rc7 >>> >>>> >> - reworked as per the comments given by Paul Walmsley >>> >>>> >> <p...@pwsan.com> >>> >>>> >> >>> >>>> >> In v3: >>> >>>> >> - rebased on top V3 of Russ dill's patch >>> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>> >>>> >> fixes an issue where the ULPI PHYs were not held in reset >>> >>>> >> while initializing the EHCI controller >>> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/65988 >>> >>>> >> >>> >>>> >> - rebased on top of patch >>> >>>> >> OMAP: USB : Fix the EHCI enumeration and core retention issue >>> >>>> >> http://permalink.gmane.org/gmane.linux.usb.general/66239 >>> >>>> >> >>> >>>> >> In V2: >>> >>>> >> - covered review comments from linux omap and usb community >>> >>>> >> - rebased on top Russ dill's patch >>> >>>> >> 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' >>> >>>> >> fixes an issue where the ULPI PHYs were not held in reset >>> >>>> >> while initializing the EHCI controller >>> >>>> >> >>> >>>> >> Keshava Munegowda (5): >>> >>>> >> ARM: OMAP: Add the USB TLL clocks device name >>> >>>> >> ARM: OMAP: USB: HOST TLL platform driver >>> >>>> >> ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver >>> >>>> >> ARM: OMAP: USB: Remove TLL specific code from USB HS core driver >>> >>>> >> ARM: OMAP: Remove older device name of the USB TLL clocks >>> >>>> >> >>> >>>> >> arch/arm/mach-omap2/clock3xxx_data.c | 8 +- >>> >>>> >> arch/arm/mach-omap2/clock44xx_data.c | 4 +- >>> >>>> >> arch/arm/mach-omap2/usb-host.c | 31 ++- >>> >>>> >> arch/arm/plat-omap/include/plat/usb.h | 7 + >>> >>>> >> drivers/mfd/Kconfig | 2 +- >>> >>>> >> drivers/mfd/Makefile | 2 +- >>> >>>> >> drivers/mfd/omap-usb-host.c | 238 ++--------------- >>> >>>> >> drivers/mfd/omap-usb-tll.c | 471 >>> >>>> >> +++++++++++++++++++++++++++++++++ >>> >>>> >> 8 files changed, 523 insertions(+), 240 deletions(-) >>> >>>> >> create mode 100644 drivers/mfd/omap-usb-tll.c >>> >>>> >> >>> >>>> >> -- >>> >>>> >> 1.7.9.5 >>> >>>> > >>> >>>> > >>> >>>> > Felipe/ Paul >>> >>>> > please let me know if you have any review comments on this v4 >>> >>>> > series. >>> >>>> > >>> >>>> > regards >>> >>>> > keshava >>> >>>> >>> >>>> Hi Felipe >>> >>>> please let me know if you have any review comments on this >>> >>>> series now. >>> >>> >>> >>> looks ok... pretty much just moving code around. >>> >>> >>> >>> -- >>> >>> balbi >>> >> >>> >> >>> >> Thanks Felipe >>> >> >>> >> then I request please give your Ack by for this series. >>> >> >>> >> regards >>> >> keshava >>> > >>> > Hi Paul >>> > do you have any review comments on this series? >>> > Felipe is OK with this series. if there are no review comments on this >>> > series >>> > I request your ack by for the same. >>> > Once this series gets in to mainline. i will start the Device tree >>> > conversion for usb2 host. >>> > >>> > regards >>> > keshava >>> >>> Hi Felipe >>> please give you ack by this series , so that I request >>> samuel to merge to mainline. >> >> sure, here you go >> >> Acked-by: Felipe Balbi <ba...@ti.com> >> >> -- >> balbi > > > Thanks Felipe > > Samuel > I request please queue this series for the next merge window. > > regards > keshava
samuel : ping regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
