Hi Panto,
That patch is good, but a similar one was already posted by Florian.
https://patchwork.kernel.org/patch/1392671/
Checking the email thread it seems that Wolfram pulled it.
Regards,
Benoit
On 9/19/2012 11:07 AM, Pantelis Antoniou wrote:
The message spit out when the i2c-omap driver load is printing
the platform device's id as a bus number. However when booting
from OF id is -1, which is not so nice.
Fix it by printing the adapter number.
[ 0.210467] omap_i2c 44e0b000.i2c: bus -1 rev2.4.0 at 400 kHz
vs
[ 0.210467] omap_i2c 44e0b000.i2c: bus 0 rev2.4.0 at 400 kHz
Signed-off-by: Pantelis Antoniou <pa...@antoniou-consulting.com>
---
drivers/i2c/busses/i2c-omap.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f722478..87bb705 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1178,9 +1178,6 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_unuse_clocks;
}
- dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
- dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
-
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -1204,6 +1201,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (IS_ERR(pinctrl))
dev_warn(dev->dev, "pins are not configured from the driver\n");
+ dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr,
+ dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
