Hi Tero,
On 09/25/2012 07:33 PM, Tero Kristo wrote:
> With the new parameters, I2C can now be put to high speed mode for
> better performance.
We have twl6040 on the same bus. have you tried this with audio enabled?
twl6040 is in standard mode (up to 100 kbps) after power up...
>
> Signed-off-by: Tero Kristo <t-kri...@ti.com>
> ---
> arch/arm/mach-omap2/omap_twl.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
> index 611cb63..7ff9667 100644
> --- a/arch/arm/mach-omap2/omap_twl.c
> +++ b/arch/arm/mach-omap2/omap_twl.c
> @@ -218,6 +218,7 @@ static struct omap_voltdm_pmic omap4_core_pmic = {
> .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
> .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
> .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
> + .i2c_high_speed = true,
> .i2c_pad_load = 3,
> .vsel_to_uv = twl6030_vsel_to_uv,
> .uv_to_vsel = twl6030_uv_to_vsel,
>
--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
