From: "Mark A. Greer" <mgr...@animalcreek.com>
The AES controller only needs to be reset once and that will
be done by the hwmod infrastructure, if possible. Therefore,
remove the reset code from the omap-aes driver.
CC: Dmitry Kasatkin <dmitry.kasat...@intel.com>
Signed-off-by: Mark A. Greer <mgr...@animalcreek.com>
---
drivers/crypto/omap-aes.c | 27 ---------------------------
1 file changed, 27 deletions(-)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 481da71..33cd783 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -160,19 +160,6 @@ static void omap_aes_write_n(struct omap_aes_dev *dd, u32
offset,
omap_aes_write(dd, offset, *value);
}
-static int omap_aes_wait(struct omap_aes_dev *dd, u32 offset, u32 bit)
-{
- unsigned long timeout = jiffies + DEFAULT_TIMEOUT;
-
- while (!(omap_aes_read(dd, offset) & bit)) {
- if (time_is_before_jiffies(timeout)) {
- dev_err(dd->dev, "omap-aes timeout\n");
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
static int omap_aes_hw_init(struct omap_aes_dev *dd)
{
/*
@@ -183,20 +170,6 @@ static int omap_aes_hw_init(struct omap_aes_dev *dd)
clk_enable(dd->iclk);
if (!(dd->flags & FLAGS_INIT)) {
- /* is it necessary to reset before every operation? */
- omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_SOFTRESET,
- AES_REG_MASK_SOFTRESET);
- /*
- * prevent OCP bus error (SRESP) in case an access to the module
- * is performed while the module is coming out of soft reset
- */
- __asm__ __volatile__("nop");
- __asm__ __volatile__("nop");
-
- if (omap_aes_wait(dd, AES_REG_SYSSTATUS,
- AES_REG_SYSSTATUS_RESETDONE))
- return -ETIMEDOUT;
-
dd->flags |= FLAGS_INIT;
dd->err = 0;
}
--
1.7.12
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
