Hi
just one comment.
On 10/03/13 02:07, Grazvydas Ignotas wrote:
> On pandora, STS_USB interrupt doesn't arrive on USB host cable disconnect
> for some reason while VBUS is driven by twl itself, but STS_HW_CONDITIONS
> is updated correctly. It does work fine when PHY is powered down though.
> To work around that we have to poll.
>
> TI PSP kernels have similar workarounds, so (many?) more boards are likely
> affected.
>
> Signed-off-by: Grazvydas Ignotas <nota...@gmail.com>
> ---
> drivers/usb/otg/twl4030-usb.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
> index 90a19ff..2c1c27e 100644
> --- a/drivers/usb/otg/twl4030-usb.c
> +++ b/drivers/usb/otg/twl4030-usb.c
> @@ -163,6 +163,8 @@ struct twl4030_usb {
> bool vbus_supplied;
> u8 asleep;
> bool irq_enabled;
> +
> + struct delayed_work id_workaround_work;
> };
>
> /* internal define on top of container_of */
> @@ -412,6 +414,16 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
> __twl4030_phy_resume(twl);
> twl->asleep = 0;
> dev_dbg(twl->dev, "%s\n", __func__);
> +
> + /*
> + * XXX When VBUS gets driven after musb goes to A mode,
> + * ID_PRES related interrupts no longer arrive, why?
> + * Register itself is updated fine though, so we must poll.
> + */
> + if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
> + cancel_delayed_work(&twl->id_workaround_work);
> + schedule_delayed_work(&twl->id_workaround_work, HZ);
> + }
> }
>
> static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
> @@ -513,6 +525,28 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
> return IRQ_HANDLED;
> }
>
> +static void twl4030_id_workaround_work(struct work_struct *work)
> +{
> + struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
> + id_workaround_work.work);
> + enum omap_musb_vbus_id_status status_prev = twl->linkstat;
> + enum omap_musb_vbus_id_status status;
> +
> + status = twl4030_usb_linkstat(twl);
> + if (status != status_prev) {
> + dev_dbg(twl->dev, "handle missing status change: %d->%d\n",
> + status_prev, status);
> + twl->linkstat = status_prev;
> + twl4030_usb_irq(0, twl);
As I understand from the subject this happen in Pandora board and
many boards can be affected.
do you need any protection between the worker and the irq when
the irq arrive as expected?
> + }
> +
> + /* don't schedule during sleep - irq works right then */
> + if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
> + cancel_delayed_work(&twl->id_workaround_work);
> + schedule_delayed_work(&twl->id_workaround_work, HZ);
> + }
> +}
> +
> static void twl4030_usb_phy_init(struct twl4030_usb *twl)
> {
> enum omap_musb_vbus_id_status status;
> @@ -613,6 +647,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> /* init spinlock for workqueue */
> spin_lock_init(&twl->lock);
>
> + INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
> +
> err = twl4030_usb_ldo_init(twl);
> if (err) {
> dev_err(&pdev->dev, "ldo init failed\n");
> @@ -653,6 +689,7 @@ static int __exit twl4030_usb_remove(struct
> platform_device *pdev)
> struct twl4030_usb *twl = platform_get_drvdata(pdev);
> int val;
>
> + cancel_delayed_work(&twl->id_workaround_work);
> free_irq(twl->irq, twl);
> device_remove_file(twl->dev, &dev_attr_vbus);
>
>
Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
