Add DT OPP table for OMAP34xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function.

This is in preparation to use generic cpu0-cpufreq driver.

Cc: Kevin Hilman <khil...@deeprootsystems.com>
Cc: "BenoƮt Cousson" <b-cous...@ti.com>
Cc: Santosh Shilimkar <santosh.shilim...@ti.com>
Cc: Shawn Guo <shawn....@linaro.org>
Cc: Keerthy <j-keer...@ti.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: cpuf...@vger.kernel.org
Cc: linux...@vger.kernel.org

Signed-off-by: Nishanth Menon <n...@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi       |   10 ++++++++++
 arch/arm/mach-omap2/opp3xxx_data.c |   11 -----------
 2 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..9a15066 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -23,6 +23,16 @@
        cpus {
                cpu@0 {
                        compatible = "arm,cortex-a8";
+                       /* OMAP3430 variants OPP1-5 */
+                       operating-points = <
+                               /* kHz    uV */
+                               125000   975000
+                               250000  1075000
+                               500000  1200000
+                               550000  1270000
+                               600000  1350000
+                       >;
+                       clock-latency = <300000>; /* From legacy driver */
                };
        };
 
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c 
b/arch/arm/mach-omap2/opp3xxx_data.c
index fc67add..1de18c2 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -87,17 +87,6 @@ struct omap_volt_data omap36xx_vddcore_volt_data[] = {
 /* OPP data */
 
 static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
-       /* MPU OPP1 */
-       OPP_INITIALIZER("mpu", true, 125000000, OMAP3430_VDD_MPU_OPP1_UV),
-       /* MPU OPP2 */
-       OPP_INITIALIZER("mpu", true, 250000000, OMAP3430_VDD_MPU_OPP2_UV),
-       /* MPU OPP3 */
-       OPP_INITIALIZER("mpu", true, 500000000, OMAP3430_VDD_MPU_OPP3_UV),
-       /* MPU OPP4 */
-       OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
-       /* MPU OPP5 */
-       OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
-
        /*
         * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
         * almost the same than the one at 83MHz thus providing very little
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to