Hello, Idea is to add the missing bits under arch/arm/*omap* required to enable by default the ti-soc-thermal driver. I am planing to move it out of staging tree. This has been scheduled to 3.11.
It would be interesting to get feedback from other ppl. By enabling it by default we could reach more ppl for testing it across the supported chips. The difference from v2 is that now the driver is changed to use GPIO bindings for Tshut as suggested by Benoit and I added a simple description what is bandgap. The difference from v1 is just that patch 01 doe snot include the dts prefix, as it is not supposed to be DTS related. Eduardo Valentin (6): thermal: ti-soc-thermal: use standard GPIO DT bindings arm: introduce config HAS_BANDGAP arm: dts: add bandgap entry for OMAP443x devices arm: dts: add bandgap entry for OMAP4460 devices arm: omap2plus_defconfig: enable TI bandgap driver arm: omap2plus_defconfig: enable DRA752 thermal support by default arch/arm/Kconfig | 3 +++ arch/arm/boot/dts/omap443x.dtsi | 4 ++++ arch/arm/boot/dts/omap4460.dtsi | 9 +++++++++ arch/arm/configs/omap2plus_defconfig | 12 ++++++++++++ arch/arm/mach-omap2/Kconfig | 1 + drivers/staging/ti-soc-thermal/ti-bandgap.c | 8 ++------ drivers/staging/ti-soc-thermal/ti_soc_thermal.txt | 9 +++++---- 7 files changed, 36 insertions(+), 10 deletions(-) -- 1.8.2.1.342.gfa7285d -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
