We no longer need to model a RESET line as a regulator since
we have the reset-gpio driver available.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..08650f9 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -28,20 +28,19 @@
};
/* HS USB Port 2 RESET */
- hsusb2_reset: hsusb2_reset_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb2_reset";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
- startup-delay-us = <70000>;
- enable-active-high;
+ hsusb2_reset: hsusb2_reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio3_80
HUB_NRESET */
+ reset-delay-us = <70000>;
+ initially-in-reset;
+ #reset-cells = <0>;
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
- reset-supply = <&hsusb2_reset>;
+ resets = <&hsusb2_reset>;
+ reset_names = "reset";
/**
* FIXME
* Put the right clock phandle here when available
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
