On 07/30/2013 07:41 AM, Rajendra Nayak wrote:
On Tuesday 30 July 2013 06:00 PM, Nishanth Menon wrote:
On 07/30/2013 06:25 AM, Rajendra Nayak wrote:
From: R Sricharan <r.sricha...@ti.com>
[...]
+ mcspi4: spi@480ba000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi4";
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
+ };
+};
ref: [1], we discussed that we should now be able to introduce all instances of
h/w blocks into the dra7.dts. Further, considering [2]
hmm, thats a long discussion on crossbar driver that [1] points to. Do you want
to summarize what you mean by 'introduce all instances of h/w blocks'
I recommend reading the last few emails on the thread about how we could
do this with pinctrl. unfortunately, this patch is not informative
enough to indicate that not all instances of the potential IP blocks are
listed here.
would you not want to follow "status = disabled" for all modules by default and
enable required modules in board file, so that we dont have to respin this yet again?
Well, I was just following the convention of whats already followed on existing
OMAPs. See [3] for some views on these.
DRA7 case, I would not think it makes sense due to the number of product
variants being done, not all will use the same set. Further, rationale
for DRA7 and my suggestion for Grant's option (1) is mainly because the
product variants will require more dtsis rather than board files using
the product variants use just the necessary modules from a common dtsi.
Makes support of variants like OMAP57xx etc trivial and constrainted to
board file usage, rather than spinning off new dtsis.
[1] http://marc.info/?t=137416599400001&r=1&w=2
[2] http://marc.info/?l=linux-omap&m=137510358229479&w=2
[3]
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-February/086297.html
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
