On 08/08/2013 08:44 AM, Santosh Shilimkar wrote:
On Tuesday 06 August 2013 01:49 PM, Dave Gerlach wrote:
From: Vaibhav Bedia <vaibhav.be...@ti.com>
Interacting with WKUP-M3 requires some more control
module register writes. Add the register offsets and
APIs to write to these.
Signed-off-by: Vaibhav Bedia <vaibhav.be...@ti.com>
Signed-off-by: Dave Gerlach <d-gerl...@ti.com>
---
arch/arm/mach-omap2/control.c | 57 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/control.h | 54 ++++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe..934041a 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -605,3 +605,60 @@ int omap3_ctrl_save_padconf(void)
}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+#if defined(CONFIG_SOC_AM33XX) && defined(CONFIG_PM)
+void am33xx_txev_eoi(void)
+{
+ omap_ctrl_writel(AM33XX_M3_TXEV_ACK, AM33XX_CONTROL_M3_TXEV_EOI);
+}
+
+void am33xx_txev_enable(void)
+{
+ omap_ctrl_writel(AM33XX_M3_TXEV_ENABLE, AM33XX_CONTROL_M3_TXEV_EOI);
+}
+
+/*
+ * Invalidate M3 firmware version before hardreset.
+ * Write invalid version in lower 4 nibbles of parameter
+ * register (ipc_regs + 0x8).
+ */
+void am33xx_pm_version_clear(void)
+{
+ omap_ctrl_writel(0xffff0000, AM33XX_CONTROL_IPC_MSG_REG2);
+}
+
+int am33xx_pm_version_get(void)
+{
+ return omap_ctrl_readl(AM33XX_CONTROL_IPC_MSG_REG2) & M3_VERSION_MASK;
+}
+
+void am33xx_pm_ipc_cmd(struct am33xx_ipc_data *data)
+{
+ omap_ctrl_writel(data->resume_addr, AM33XX_CONTROL_IPC_MSG_REG0);
+ omap_ctrl_writel(data->sleep_mode, AM33XX_CONTROL_IPC_MSG_REG1);
+ omap_ctrl_writel(data->param1, AM33XX_CONTROL_IPC_MSG_REG2);
+ omap_ctrl_writel(data->param2, AM33XX_CONTROL_IPC_MSG_REG3);
+ omap_ctrl_writel(data->param3, AM33XX_CONTROL_IPC_MSG_REG4);
+}
+
+int am33xx_pm_status(void)
+{
+ int i;
+
+ i = omap_ctrl_readl(AM33XX_CONTROL_IPC_MSG_REG1);
+ i &= IPC_RESP_MASK;
+ i >>= __ffs(IPC_RESP_MASK);
+
+ return i;
+}
+
+int am33xx_pm_wake_src(void)
+{
+ int i;
+
+ i = omap_ctrl_readl(AM33XX_CONTROL_IPC_MSG_REG6);
+ i &= 0xff;
+
+ return i;
+}
+#endif /* CONFIG_SOC_AM33XX && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index f7d7c2e..9be587c 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -370,6 +370,22 @@
#define AM33XX_DEV_FEATURE 0x604
#define AM33XX_SGX_MASK BIT(29)
+/* AM33XX M3_TXEV_EOI register */
+#define AM33XX_CONTROL_M3_TXEV_EOI 0x1324
+
+#define AM33XX_M3_TXEV_ACK (0x1 << 0)
+#define AM33XX_M3_TXEV_ENABLE (0x0 << 0)
+
+/* AM33XX IPC message registers */
+#define AM33XX_CONTROL_IPC_MSG_REG0 0x1328
+#define AM33XX_CONTROL_IPC_MSG_REG1 0x132C
+#define AM33XX_CONTROL_IPC_MSG_REG2 0x1330
+#define AM33XX_CONTROL_IPC_MSG_REG3 0x1334
+#define AM33XX_CONTROL_IPC_MSG_REG4 0x1338
+#define AM33XX_CONTROL_IPC_MSG_REG5 0x133C
+#define AM33XX_CONTROL_IPC_MSG_REG6 0x1340
+#define AM33XX_CONTROL_IPC_MSG_REG7 0x1344
+
/* CONTROL OMAP STATUS register to identify OMAP3 features */
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
@@ -429,6 +445,44 @@ extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
extern void omap2_set_globals_control(void __iomem *ctrl,
void __iomem *ctrl_pad);
+struct am33xx_ipc_data {
+ u32 resume_addr;
+ u32 sleep_mode;
+ u32 param1;
+ u32 param2;
+ u32 param3;
+ u32 param4;
+ u32 param5;
+ u32 param6;
+};
+
+#define IPC_RESP_SHIFT 16
+#define IPC_RESP_MASK (0xffff << 16)
+
+#define M3_VERSION_SHIFT 0
+#define M3_VERSION_MASK (0xffff << 0)
+
+/*
+ * 9-4 = VTT GPIO PIN (6 Bits)
+ * 3 = VTT Status (1 Bit)
+ * 2-0 = Memory Type (2 Bits)
+*/
+#define MEM_TYPE_SHIFT (0x0)
+#define MEM_TYPE_MASK (0x7 << 0)
+#define VTT_STAT_SHIFT (0x3)
+#define VTT_STAT_MASK (0x1 << 3)
+#define VTT_GPIO_PIN_SHIFT (0x4)
+#define VTT_GPIO_PIN_MASK (0x2f << 4)
+
+extern void am33xx_wkup_m3_ipc_cmd(struct am33xx_ipc_data *data);
+extern void am33xx_txev_eoi(void);
+extern void am33xx_txev_enable(void);
+extern void am33xx_pm_version_clear(void);
+extern int am33xx_pm_version_get(void);
+extern void am33xx_pm_ipc_cmd(struct am33xx_ipc_data *data);
+extern int am33xx_pm_status(void);
+extern int am33xx_pm_wake_src(void);
+
Lets address the above better. I don't see a need of 8 functions
exported doing one or 2 register writes.
Look M3 based handling is going to be there on future SOCs
as well and this kind of handling of IPC is very short cited.
The idea here was to move all control module register accesses into one
file in planning of implementing a driver for the control module itself
in the future.
Probably we should have a separate driver for M3 in linux which
can have all this local code instead of all these exports.
The wkup_m3 code has been moved to a small driver found in patch 8 of
this series, would it better to move this code there rather than with
the rest of the control module code?
Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
