On 09/20/2013 12:38 PM, Balaji T K wrote:
> correct mux mode for mmc1_cmd to detect eMMC on bone-black
>
> Signed-off-by: Balaji T K <balaj...@ti.com>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
> b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 56361ce..90ab56c 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -117,7 +117,7 @@
> emmc_pins: pinmux_emmc_pins {
> pinctrl-single,pins = <
> 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /*
> gpmc_csn1.mmc1_clk */
> - 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /*
> gpmc_csn2.mmc1_cmd */
> + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /*
> gpmc_csn2.mmc1_cmd */
> 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /*
> gpmc_ad0.mmc1_dat0 */
> 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /*
> gpmc_ad1.mmc1_dat1 */
> 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /*
> gpmc_ad2.mmc1_dat2 */
>
is'nt this a common change? why is it "black only"? if it is so, then
the pinmux should probably be spun off outside bone-common.dtsi into
boneblack.dtsi perhaps?
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
