Hi,

Just tried to update BIOS on a PE 2850 on a production server and it 
failed (see below). I have a couple questions:

1. Being this is a production server, how should I best proceed? I'm 
afraid if I reboot the system, it will not come back up.

2. Is it save to reboot the system w/ 
http://linux.dell.com/files/openmanage-contributions/omsa-63-live/OMSA63-CentOS55-x86_64-LiveCD.iso
 
and see if I can install the update that route?

Any suggestions are greatly appreciated...



# update_firmware --yes

Running system inventory...

Searching storage directory for available BIOS updates...
Checking BIOS - a06
         Available: dell_dup_componentid_00159 - a07
         Found Update: dell_dup_componentid_00159 - a07
Checking Secondary Backplane - 1.00
         Available: dell_dup_componentid_03967 - 1.00
         Did not find a newer package to install that meets all 
installation checks.
Checking System BIOS for PowerEdge 2850 - A06
         Did not find a newer package to install that meets all 
installation checks.
Checking PowerEdge Expandable RAID Controller 4e/Di Firmware - 522a
         Available: 
pci_firmware(ven_0x1028_dev_0x0013_subven_0x1028_subdev_0x016d) - 5b2d
         Did not find a newer package to install that meets all 
installation checks.
Checking BMC - 1.83
         Available: dell_dup_componentid_05814 - 1.83
         Did not find a newer package to install that meets all 
installation checks.

Found firmware which needs to be updated.

Running updates...
  100% Installing dell_dup_componentid_00159 - a07
Done: The BIOS image file is successfully loaded. Reboot your system to 
complete the
update. Do not shutdown, cold reboot, power cycle, or switch off your 
system
before the BIOS update is complete.  Restart your system for the update 
to take
effect since the update will be incomplete until you reboot the system.

-       Installing 
pci_firmware(ven_0x1028_dev_0x0012_subven_0x1028_subdev_ ...Installation 
failed for package: 
pci_firmware(ven_0x1028_dev_0x0012_subven_0x1028_subdev_0x0012) - 1.75
aborting update...

The error message from the low-level command was:

Firmware update failed

===============

Thanks,

SW

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

Reply via email to