Raz:
The 3ware (at least my 9500S-8) keeps the info about the disk and how
it fits into the RAID array on the disk; I think in the DCB is used
for this. You can (and I have) unplug the disks, then connect them to
different ports and the array will still work fine.
When you are adding a disk from a different array it probably has the
DCB from that array. This is conflicting with your new array. I would
do as the Dan suggests, and clear the disk.
Jason.
On 8/2/05, Dan Stromberg <[EMAIL PROTECTED]> wrote: On Tue,
2005-08-02 at 13:52 +0300, Raz Ben-Jehuda(caro) wrote:
> i have encountered a weired feature of 3ware raid.
> When i try to put inside an existing raid a disk which
> belonged to a different 3ware raid if fail.
> Any idea anyone ?
Two thoughts:
1) Maybe test the disk in another machine and see if it's still good
2) Maybe wipe the disk clean in another machine with something like:
dd if=/dev/zero of=/dev/sdb
...but be very careful to get the right disk (IE, you may not
need /dev/sdb, you might need /dev/hdd or a number of other
possibilities).
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
