On Tuesday November 29, [EMAIL PROTECTED] wrote: > The time and speed display for resync is wrong, the recovery numbers are fine. > The resync is actually running at a few MB/sec. > > md1 : active raid6 sdn1[8](S) sde1[9] sdq1[0] sdu1[6] sdo1[5] sdaa3[4] > sdab1[2] sds1[1] > 1757815296 blocks level 6, 128k chunk, algorithm 2 [8/6] [UUU_UUU_] > [>....................] recovery = 3.6% (10616704/292969216) > finish=840.3min speed=5597K/sec > > md0 : active raid6 sdac2[0] sdz1[4] sdy1[2] sdx1[1] sdw1[3] sdv1[5] sdr2[6] > 1875299328 blocks level 6, 128k chunk, algorithm 2 [8/7] [UUUUUUU_] > [======>..............] resync = 33.1% (103563392/312549888) > finish=1.5min speed=2288625K/sec > > This is a amd64 x2 but running in single processor mode because of all the > timer problems with dual cpus
Weird..... Does it always report wrong numbers, or was this a once-off? i.e. if you cat the file 5 times in a row, what sorts of results do you get? Are there any interesting kernel messages during the resync? I'm stumped, so any extra info you might be able to provide will probably be useful. Thanks, NeilBrown - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
