On Tue, May 30, 2006 at 08:08:03PM +0300, Michael Theodoulou wrote:
Hello,
I am trying to create a RAID5 array out of 3 160GB SATA drives. After
i create the array i want to partition the device into 2 partitions.
The system lies on a SCSI disk and the 2 partitions will be used for
data storage.
The SATA host is an HPT374 device with drivers compiled in the kernel.
These are the steps i followed
mdadm -Cv --auto=part /dev/md_d0 --chunk=64 -l 5 --raid-devices=3
/dev/hde /dev/hdi /dev/hdk
Running this command notifies me that there is an ext2 fs on one of
the drives even if i fdisked them before and removed all partititions.
....
Furthermore when i fdisk the drives after all of this i can see the 2
partitions on /dev/hde and /dev/hdi but /dev/hdk shows that no
partition exists. Is this a sign of data corruption or drive failure?
are you sure you removed all partitions before creating the md
Shouldnt all 3 drives show the same partition information?
the drives should not contain any partition information.
(well actually the first will show an invalid partition table, since the
partition of the mdp array will be written exactly at the beginning of
the first raid disk.
L.
--
Luca Berra -- [EMAIL PROTECTED]
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
