Of course you could just run repair but then you would never know that
mismatch_cnt was > 0.
Justin.
On Sat, 24 Feb 2007, Justin Piszcz wrote:
Perhaps,
The way it works (I believe is as follows)
1. echo check > sync_action
2. If mismatch_cnt > 0 then run:
3. echo repair > sync_action
4. Re-run #1
5. Check to make sure it is back to 0.
Justin.
On Sat, 24 Feb 2007, Eyal Lebedinsky wrote:
I did a resync since, which ended up with the same mismatch_cnt of 184.
I noticed that the count *was* reset to zero when the resync started,
but ended up with 184 (same as after the check).
I thought that the resync just calculates fresh parity and does not
bother checking if it is different. So what does this final count mean?
This leads me to ask: why bother doing a check if I will always run
a resync after an error - better run a resync in the first place?
--
Eyal Lebedinsky ([EMAIL PROTECTED]) <http://samba.org/eyal/>
attach .zip as .dat
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
