On Wed, Jan 30, 2008 at 11:36:39PM +0100, Janek Kozicki wrote: > Keld Jørn Simonsen said: (by the date of Wed, 30 Jan 2008 23:00:07 +0100) > > > Teoretically, raid0 and raid10,f2 should be the same for reading, given the > > same size of the md partition, etc. For writing, raid10,f2 should be half > > the speed of > > raid0. This should go both for sequential and random read/writes. > > But I would like to have real test numbers. > > Me too. Thanks. Are there any other raid levels that may count here? > Raid-10 with some other options?
Given that you want maximum thruput for both reading and writing, I think there is only one way to go, that is raid0. All the raid10's will have double time for writing, and raid5 and raid6 will also have double or triple writing times, given that you can do striped writes on the raid0. For random and sequential writing in the normal case (no faulty disks) I would guess that all of the raid10's, the raid1 and raid5 are about equally fast, given the same amount of hardware. (raid5, raid6 a little slower given the unactive parity chunks). For random reading, raid0, raid1, raid10 should be equally fast, with raid5 a little slower, due to one of the disks virtually out of operation, as it is used for the XOR parity chunks. raid6 should be somewhat slower due to 2 non-operationable disks. raid10,f2 may have a slight edge due to virtually only using half the disk giving better average seek time, and using the faster outer disk halves. For sequential reading, raid0 and raid10,f2 should be equally fast. Possibly raid10,o2 comes quite close. My guess is that raid5 then is next, achieving striping rates, but with the loss of one parity drive, and then raid1 and raid10,n2 with equal performance. In degraded mode, I guess for random read/writes the difference is not big between any of the raid1, raid5 and raid10 layouts, while sequential reads will be especially bad for raid10,f2 approaching the random read rate, and others will enjoy the normal speed of the above filesystem (ext3, reiserfs, xfs etc). Theory, theory theory. Show me some real figures. Best regards Keld - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
