Hi Sasha,
On Tue, Dec 29, 2009 at 11:29 AM, Sasha Khapyorsky <sas...@voltaire.com> wrote:
> Hi Hal,
>
> On 14:41 Tue 01 Dec , Hal Rosenstock wrote:
>>
>> Optimized SLtoVLMappingTable programming reduces the number of MADs
>> needed from O(n**2) to O(n). See IBA 1.2.1 vol 1 p. 843 14.2.5.8
>> SLtoVLMappingTable.
>>
>> Signed-off-by: Hal Rosenstock <hal.rosenst...@gmail.com>
>> ---
>> Changes since v2:
>> Use osm_log rather than OSM_LOG in osm_slvl_rcv_process for optimized
>> sl2vl mapping programming verbose log message
>
> I didn't ask for such change. Instead I asked to avoid the function
> (osm_slvl_rcv_process() in this patch) constructed in form of:
>
> if (cond1)
> goto flow1;
>
> do_flow2;
>
> goto end;
>
> flow1:
> do_flow1;
>
> end:
>
> In general this is equivalent to simpler and more readable:
>
> if (cond1)
> do_flow1();
> else
> do_flow2();
>
> And in case of osm_slvl_rcv_process() even nicer merge is possible when
> slvl port table setup loop is shared, but its range (start*port and
> end*port values) is defined differently for various input cases. Just
> like this (against your patch, rebased over recent fixes, compilation
> only tested):
>
>
> diff --git a/opensm/opensm/osm_slvl_map_rcv.c
> b/opensm/opensm/osm_slvl_map_rcv.c
> index 7ca0b8f..73c6253 100644
> --- a/opensm/opensm/osm_slvl_map_rcv.c
> +++ b/opensm/opensm/osm_slvl_map_rcv.c
> @@ -72,8 +72,8 @@ void osm_slvl_rcv_process(IN void *context, IN void *p_data)
> ib_net64_t port_guid;
> ib_net64_t node_guid;
> uint32_t attr_mod;
> - uint8_t out_port_num, in_port_num, startinport, startoutport,
> - endinport, endoutport;
> + uint8_t startinport, endinport, startoutport, endoutport;
> + uint8_t in_port, out_port;
>
> CL_ASSERT(sm);
>
> @@ -109,80 +109,51 @@ void osm_slvl_rcv_process(IN void *context, IN void
> *p_data)
> if (osm_node_get_type(p_node) == IB_NODE_TYPE_SWITCH) {
> unsigned num_ports = osm_node_get_num_physp(p_node) - 1;
> attr_mod = cl_ntoh32(p_smp->attr_mod);
> - out_port_num = attr_mod & 0xff;
> - in_port_num = (attr_mod >> 8) & 0xff;
> - if (in_port_num > num_ports || out_port_num > num_ports) {
> +
> + if (attr_mod & 0x10000) {
> + startoutport =
> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
> + endoutport = osm_node_get_num_physp(p_node) - 1;
> + } else
> + startoutport = endoutport = attr_mod & 0xff;
> +
> + if (attr_mod & 0x20000) {
> + startinport =
> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
> + endinport = osm_node_get_num_physp(p_node) - 1;
> + } else
> + startinport = endinport = (attr_mod >> 8) & 0xff;
> +
> + if (startinport > num_ports || startoutport > num_ports) {
> OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 2C07"
> "Invalid attribute modifier 0x%x reveived in"
> " response from switch 0x%" PRIx64 "\n",
> - cl_ntoh32(p_smp->attr_mod),
> - cl_ntoh64(node_guid));
> + cl_ntoh32(attr_mod), cl_ntoh64(node_guid));
> goto Exit;
> }
> - if (attr_mod & 0x30000)
> - goto opt_sl2vl;
> - p_physp = osm_node_get_physp_ptr(p_node, out_port_num);
> - } else {
> - p_physp = p_port->p_physp;
> - out_port_num = p_physp->port_num;
> - in_port_num = 0;
> - }
>
> - /*
> - We do not care if this is a result of a set or get -
> - all we want is to update the subnet.
> - */
> - OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
> - "Received SLtoVL GetResp in_port_num %u out_port_num %u with "
> - "GUID 0x%" PRIx64 " for parent node GUID 0x%" PRIx64 ", TID
> 0x%"
> - PRIx64 "\n", in_port_num, out_port_num, cl_ntoh64(port_guid),
> - cl_ntoh64(node_guid), cl_ntoh64(p_smp->trans_id));
> -
> - /*
> - Determine if we encountered a new Physical Port.
> - If so, Ignore it.
> - */
> - if (!p_physp) {
> - OSM_LOG(sm->p_log, OSM_LOG_ERROR,
> - "Got invalid port number %u\n", out_port_num);
> - goto Exit;
> + } else {
> + startoutport = endoutport = p_port->p_physp->port_num;
> + startinport = endinport = 0;
> }
>
> - osm_dump_slvl_map_table(sm->p_log, port_guid, in_port_num,
> - out_port_num, p_slvl_tbl, OSM_LOG_DEBUG);
> -
> - osm_physp_set_slvl_tbl(p_physp, p_slvl_tbl, in_port_num);
> - goto Exit;
> -
> -opt_sl2vl:
> - if (osm_log_is_active(sm->p_log, OSM_LOG_VERBOSE))
> - osm_log(sm->p_log, OSM_LOG_VERBOSE,
> - "Received optimized SLtoVL get response in_port_num
> %u "
> - "out_port_num %u with GUID 0x%" PRIx64 " for parent "
> - "node GUID 0x%" PRIx64 ", TID 0x%" PRIx64 "\n",
> - in_port_num, out_port_num, cl_ntoh64(port_guid),
> - cl_ntoh64(node_guid), cl_ntoh64(p_smp->trans_id));
> -
> - osm_dump_slvl_map_table(sm->p_log, port_guid, in_port_num,
> - out_port_num, p_slvl_tbl, OSM_LOG_DEBUG);
> -
> - if (attr_mod & 0x10000) {
> - startoutport =
> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
> - endoutport = osm_node_get_num_physp(p_node);
> - } else
> - endoutport = startoutport = out_port_num;
> - if (attr_mod & 0x20000) {
> - startinport =
> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
> - endinport = osm_node_get_num_physp(p_node);
> - } else
> - endinport = startinport = in_port_num;
> -
> - for (out_port_num = startoutport; out_port_num < endoutport;
> - out_port_num++) {
> - p_physp = osm_node_get_physp_ptr(p_node, out_port_num);
> - for (in_port_num = startinport; in_port_num < endinport;
> - in_port_num++)
> - osm_physp_set_slvl_tbl(p_physp, p_slvl_tbl,
> in_port_num);
> + OSM_LOG(sm->p_log, OSM_LOG_DEBUG, "Received SLtoVL GetResp"
> + " in_port_num %u out_port_num %u with GUID 0x%" PRIx64
> + " for parent node GUID 0x%" PRIx64 ", TID 0x%" PRIx64 "\n",
> + startinport == endinport ? startinport : 0xff,
> + startoutport == endoutport ? startoutport : 0xff,
> + cl_ntoh64(port_guid), cl_ntoh64(node_guid),
> + cl_ntoh64(p_smp->trans_id));
> +
> + osm_dump_slvl_map_table(sm->p_log, port_guid,
> + startinport == endinport ? startinport : 0xff,
> + startoutport == endoutport ? startoutport :
> 0xff,
> + p_slvl_tbl, OSM_LOG_DEBUG);
> +
> + for (out_port = startoutport; out_port <= endoutport; out_port++) {
> + p_physp = osm_node_get_physp_ptr(p_node, out_port);
> + for (in_port = startinport; in_port <= endinport; in_port++)
> + osm_physp_set_slvl_tbl(p_physp, p_slvl_tbl, in_port);
> }
>
> Exit:
This patch looks good to me and appears to be working in both the non
optimized and optimized cases although there is at least one subtle
change and check removal which should be OK (not sure what the
original motivation was).
>> Removed unneeded check of p_physp in input port loop in osm_slvl_rcv_process
>> for optimized sl2vl mapping programming
>>
>> Changes since v1:
>> Changed optimized programming flow in osm_qos to only call
>> sl2vl_update once per switch supporting this feature
>>
>> diff --git a/opensm/include/opensm/osm_subnet.h
>> b/opensm/include/opensm/osm_subnet.h
>> index 3c08689..583c070 100644
>> --- a/opensm/include/opensm/osm_subnet.h
>> +++ b/opensm/include/opensm/osm_subnet.h
>> @@ -206,6 +206,7 @@ typedef struct osm_subn_opt {
>> boolean_t daemon;
>> boolean_t sm_inactive;
>> boolean_t babbling_port_policy;
>> + boolean_t use_optimized_slvl;
>> osm_qos_options_t qos_options;
>> osm_qos_options_t qos_ca_options;
>> osm_qos_options_t qos_sw0_options;
>> @@ -433,6 +434,10 @@ typedef struct osm_subn_opt {
>> * babbling_port_policy
>> * OpenSM will enforce its "babbling" port policy.
>> *
>> +* use_optimized_slvl
>> +* Use optimized SLtoVLMappingTable programming if
>> +* device indicates it supports this.
>> +*
>> * perfmgr
>> * Enable or disable the performance manager
>> *
>> diff --git a/opensm/opensm/osm_qos.c b/opensm/opensm/osm_qos.c
>> index 08f9a60..617a86e 100644
>> --- a/opensm/opensm/osm_qos.c
>> +++ b/opensm/opensm/osm_qos.c
>
> I'm yet reviewing the changes in osm_qos.c.
>
>> @@ -1,5 +1,6 @@
>> /*
>> * Copyright (c) 2006-2009 Voltaire, Inc. All rights reserved.
>> + * Copyright (c) 2009 HNR Consulting. All rights reserved.
>> *
>> * This software is available to you under a choice of one of two
>> * licenses. You may choose to be licensed under the terms of the GNU
>> @@ -150,7 +151,7 @@ static ib_api_status_t vlarb_update(osm_sm_t * sm,
>> osm_physp_t * p,
>>
>> static ib_api_status_t sl2vl_update_table(osm_sm_t * sm, osm_physp_t * p,
>> uint8_t in_port, uint8_t out_port,
>> - unsigned force_update,
>> + unsigned optimize, unsigned
>> force_update,
>> const ib_slvl_table_t * sl2vl_table)
>> {
>> osm_madw_context_t context;
>> @@ -180,41 +181,47 @@ static ib_api_status_t sl2vl_update_table(osm_sm_t *
>> sm, osm_physp_t * p,
>> context.slvl_context.node_guid = osm_node_get_node_guid(p_node);
>> context.slvl_context.port_guid = osm_physp_get_port_guid(p);
>> context.slvl_context.set_method = TRUE;
>> - attr_mod = in_port << 8 | out_port;
>> + if (optimize)
>> + /* wildcard both input and output ports */
>> + attr_mod = 0x30000;
>> + else
>> + attr_mod = in_port << 8 | out_port;
>> return osm_req_set(sm, osm_physp_get_dr_path_ptr(p),
>> (uint8_t *) & tbl, sizeof(tbl),
>> IB_MAD_ATTR_SLVL_TABLE, cl_hton32(attr_mod),
>> CL_DISP_MSGID_NONE, &context);
>> }
>>
>> -static ib_api_status_t sl2vl_update(osm_sm_t * sm, osm_port_t * p_port,
>> +static ib_api_status_t sl2vl_update(osm_sm_t * sm, osm_physp_t * p0,
>> osm_physp_t * p, uint8_t port_num,
>> - unsigned force_update,
>> + unsigned optimize, unsigned force_update,
>> const struct qos_config *qcfg)
>> {
>> ib_api_status_t status;
>> uint8_t i, num_ports;
>> - osm_physp_t *p_physp;
>> + osm_node_t *p_node;
>>
>> - if (osm_node_get_type(osm_physp_get_node_ptr(p)) ==
>> IB_NODE_TYPE_SWITCH) {
>> + p_node = osm_physp_get_node_ptr(p);
>> + if (osm_node_get_type(p_node) == IB_NODE_TYPE_SWITCH) {
>> if (ib_port_info_get_vl_cap(&p->port_info) == 1) {
>> /* Check port 0's capability mask */
>> - p_physp = p_port->p_physp;
>> - if (!
>> - (p_physp->port_info.
>> - capability_mask & IB_PORT_CAP_HAS_SL_MAP))
>> + if (!(p0->port_info.capability_mask &
>> IB_PORT_CAP_HAS_SL_MAP))
>> return IB_SUCCESS;
>> }
>> - num_ports = osm_node_get_num_physp(osm_physp_get_node_ptr(p));
>> + num_ports = osm_node_get_num_physp(p_node);
>> } else {
>> if (!(p->port_info.capability_mask & IB_PORT_CAP_HAS_SL_MAP))
>> return IB_SUCCESS;
>> num_ports = 1;
>> }
>>
>> + if (optimize)
>> + return sl2vl_update_table(sm, p, 1, port_num, optimize,
>> + force_update, &qcfg->sl2vl);
>> +
>> for (i = 0; i < num_ports; i++) {
>> - status = sl2vl_update_table(sm, p, i, port_num, force_update,
>> - &qcfg->sl2vl);
>> + status = sl2vl_update_table(sm, p, i, port_num, optimize,
>> + force_update, &qcfg->sl2vl);
>> if (status != IB_SUCCESS)
>> return status;
>> }
>> @@ -222,22 +229,30 @@ static ib_api_status_t sl2vl_update(osm_sm_t * sm,
>> osm_port_t * p_port,
>> return IB_SUCCESS;
>> }
>>
>> -static int qos_physp_setup(osm_log_t * p_log, osm_sm_t * sm,
>> - osm_port_t * p_port, osm_physp_t * p,
>> - uint8_t port_num, unsigned force_update,
>> - const struct qos_config *qcfg)
>> +static int vlarb_physp_setup(osm_sm_t * sm, osm_physp_t * p, uint8_t
>> port_num,
>> + unsigned force_update,
>> + const struct qos_config *qcfg)
>> {
>> - ib_api_status_t status;
>> -
>> /* OpVLs should be ok at this moment - just use it */
>>
>> /* setup VL high limit on the physp later to be updated by link mgr */
>> p->vl_high_limit = qcfg->vl_high_limit;
>>
>> /* setup VLArbitration */
>> - status = vlarb_update(sm, p, port_num, force_update, qcfg);
>> + return vlarb_update(sm, p, port_num, force_update, qcfg);
>> +}
>> +
>> +static int qos_physp_setup(osm_log_t * p_log, osm_sm_t * sm,
>> + osm_physp_t * p0, osm_physp_t * p,
>> + uint8_t port_num, unsigned force_update,
>> + const struct qos_config *qcfg)
>> +{
>> + ib_api_status_t status;
>> +
>> + /* setup VLArbitration */
>> + status = vlarb_physp_setup(sm, p, port_num, force_update, qcfg);
>> if (status != IB_SUCCESS) {
>> - OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 6202 : "
>> + OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 6202: "
>> "failed to update VLArbitration tables "
>> "for port %" PRIx64 " #%d\n",
>> cl_ntoh64(p->port_guid), port_num);
>> @@ -245,9 +260,9 @@ static int qos_physp_setup(osm_log_t * p_log, osm_sm_t *
>> sm,
>> }
>>
>> /* setup SL2VL tables */
>> - status = sl2vl_update(sm, p_port, p, port_num, force_update, qcfg);
>> + status = sl2vl_update(sm, p0, p, port_num, 0, force_update, qcfg);
>> if (status != IB_SUCCESS) {
>> - OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 6203 : "
>> + OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 6203: "
>> "failed to update SL2VLMapping tables "
>> "for port %" PRIx64 " #%d\n",
>> cl_ntoh64(p->port_guid), port_num);
>> @@ -267,6 +282,7 @@ int osm_qos_setup(osm_opensm_t * p_osm)
>> uint32_t num_physp;
>> osm_physp_t *p_physp;
>> osm_node_t *p_node;
>> + osm_switch_t *p_sw;
>> unsigned force_update;
>> int ret = 0;
>> uint8_t i;
>> @@ -290,6 +306,44 @@ int osm_qos_setup(osm_opensm_t * p_osm)
>> /* read QoS policy config file */
>> osm_qos_parse_policy_file(&p_osm->subn);
>>
>> + /* loop on switches that support optimized SL2VL programming first */
>> + p_tbl = &p_osm->subn.sw_guid_tbl;
>> + p_next = cl_qmap_head(p_tbl);
>> + while (p_next != cl_qmap_end(p_tbl)) {
>> + p_sw = (osm_switch_t *) p_next;
>> + p_next = cl_qmap_next(p_next);
>> +
>> + if (ib_switch_info_get_opt_sl2vlmapping(&p_sw->switch_info) &&
>> + p_osm->subn.opt.use_optimized_slvl) {
>> + p_physp = osm_node_get_physp_ptr(p_sw->p_node, 1);
>> + num_physp = osm_node_get_num_physp(p_sw->p_node);
>> + force_update = p_osm->subn.need_update;
>> + for (i = 1; i < num_physp; i++) {
>> + p_physp = osm_node_get_physp_ptr(p_sw->p_node,
>> i);
>> + if (!p_physp)
>> + continue;
>> + if (vlarb_physp_setup(&p_osm->sm, p_physp, i,
>> + p_physp->need_update ||
>> + p_osm->subn.need_update,
>> + &swe_config))
>> + ret = -1;
>> + force_update |= p_physp->need_update;
>> + }
>> + if (sl2vl_update(&p_osm->sm,
>> + osm_node_get_physp_ptr(p_sw->p_node,
>> 0),
>> + p_physp, i, 1, force_update,
>> + &swe_config)) {
>> + OSM_LOG(&p_osm->log, OSM_LOG_ERROR, "ERR 6204:
>> "
>> + "failed to update optimized
>> SL2VLMapping"
>> + " tables for port %" PRIx64 " #%d\n",
>> + cl_ntoh64(p_physp->port_guid), i);
>> + ret = -1;
>> + }
>> + }
>> + }
>> +
>> + /* now, loop on ports skipping the external ports of switches
>> + that support optimized SL2VL programming */
>> p_tbl = &p_osm->subn.port_guid_tbl;
>> p_next = cl_qmap_head(p_tbl);
>> while (p_next != cl_qmap_end(p_tbl)) {
>> @@ -298,6 +352,11 @@ int osm_qos_setup(osm_opensm_t * p_osm)
>>
>> p_node = p_port->p_node;
>> if (p_node->sw) {
>> + /* skip switches with optimized SL2VL mapping
>> + programming since already done */
>> + if
>> (ib_switch_info_get_opt_sl2vlmapping(&p_node->sw->switch_info) &&
>> + p_osm->subn.opt.use_optimized_slvl)
>> + goto check_port0;
>> num_physp = osm_node_get_num_physp(p_node);
>> for (i = 1; i < num_physp; i++) {
>> p_physp = osm_node_get_physp_ptr(p_node, i);
>> @@ -306,10 +365,11 @@ int osm_qos_setup(osm_opensm_t * p_osm)
>> force_update = p_physp->need_update ||
>> p_osm->subn.need_update;
>> if (qos_physp_setup(&p_osm->log, &p_osm->sm,
>> - p_port, p_physp, i,
>> + p_port->p_physp, p_physp,
>> i,
>> force_update, &swe_config))
>> ret = -1;
>> }
>> +check_port0:
>> /* skip base port 0 */
>> if (!ib_switch_info_is_enhanced_port0
>> (&p_node->sw->switch_info))
>> @@ -326,8 +386,8 @@ int osm_qos_setup(osm_opensm_t * p_osm)
>> continue;
>>
>> force_update = p_physp->need_update || p_osm->subn.need_update;
>> - if (qos_physp_setup(&p_osm->log, &p_osm->sm, p_port, p_physp,
>> - 0, force_update, cfg))
>> + if (qos_physp_setup(&p_osm->log, &p_osm->sm, p_port->p_physp,
>> + p_physp, 0, force_update, cfg))
>> ret = -1;
>> }
>>
>> diff --git a/opensm/opensm/osm_slvl_map_rcv.c
>> b/opensm/opensm/osm_slvl_map_rcv.c
>> index 4f75690..214a763 100644
>> --- a/opensm/opensm/osm_slvl_map_rcv.c
>> +++ b/opensm/opensm/osm_slvl_map_rcv.c
>> @@ -2,6 +2,7 @@
>> * Copyright (c) 2004-2009 Voltaire, Inc. All rights reserved.
>> * Copyright (c) 2002-2005 Mellanox Technologies LTD. All rights reserved.
>> * Copyright (c) 1996-2003 Intel Corporation. All rights reserved.
>> + * Copyright (c) 2009 HNR Consulting. All rights reserved.
>> *
>> * This software is available to you under a choice of one of two
>> * licenses. You may choose to be licensed under the terms of the GNU
>> @@ -70,7 +71,9 @@ void osm_slvl_rcv_process(IN void *context, IN void
>> *p_data)
>> osm_slvl_context_t *p_context;
>> ib_net64_t port_guid;
>> ib_net64_t node_guid;
>> - uint8_t out_port_num, in_port_num;
>> + uint32_t attr_mod;
>> + uint8_t out_port_num, in_port_num, startinport, startoutport,
>> + endinport, endoutport;
>>
>> CL_ASSERT(sm);
>>
>> @@ -109,6 +112,9 @@ void osm_slvl_rcv_process(IN void *context, IN void
>> *p_data)
>> (uint8_t) cl_ntoh32(p_smp->attr_mod & 0xFF000000);
>> in_port_num =
>> (uint8_t) cl_ntoh32((p_smp->attr_mod & 0x00FF0000) << 8);
>> + attr_mod = cl_ntoh32(p_smp->attr_mod);
>> + if (attr_mod & 0x30000)
>> + goto opt_sl2vl;
>> p_physp = osm_node_get_physp_ptr(p_node, out_port_num);
>> } else {
>> p_physp = p_port->p_physp;
>> @@ -121,7 +127,7 @@ void osm_slvl_rcv_process(IN void *context, IN void
>> *p_data)
>> all we want is to update the subnet.
>> */
>> OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
>> - "Got SLtoVL get response in_port_num %u out_port_num %u with "
>> + "Received SLtoVL GetResp in_port_num %u out_port_num %u with "
>> "GUID 0x%" PRIx64 " for parent node GUID 0x%" PRIx64 ", TID
>> 0x%"
>> PRIx64 "\n", in_port_num, out_port_num, cl_ntoh64(port_guid),
>> cl_ntoh64(node_guid), cl_ntoh64(p_smp->trans_id));
>> @@ -140,6 +146,38 @@ void osm_slvl_rcv_process(IN void *context, IN void
>> *p_data)
>> out_port_num, p_slvl_tbl, OSM_LOG_DEBUG);
>>
>> osm_physp_set_slvl_tbl(p_physp, p_slvl_tbl, in_port_num);
>> + goto Exit;
>> +
>> +opt_sl2vl:
>> + if (osm_log_is_active(sm->p_log, OSM_LOG_VERBOSE))
>> + osm_log(sm->p_log, OSM_LOG_VERBOSE,
>> + "Received optimized SLtoVL get response in_port_num %u
>> "
>> + "out_port_num %u with GUID 0x%" PRIx64 " for parent "
>> + "node GUID 0x%" PRIx64 ", TID 0x%" PRIx64 "\n",
>> + in_port_num, out_port_num, cl_ntoh64(port_guid),
>> + cl_ntoh64(node_guid), cl_ntoh64(p_smp->trans_id));
>> +
>> + osm_dump_slvl_map_table(sm->p_log, port_guid, in_port_num,
>> + out_port_num, p_slvl_tbl, OSM_LOG_DEBUG);
>> +
>> + if (attr_mod & 0x10000) {
>> + startoutport =
>> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
>> + endoutport = osm_node_get_num_physp(p_node);
>> + } else
>> + endoutport = startoutport = out_port_num;
>
> For this case (when endoutport == startoutport) in later loop:
>
> for (out_port_num = startoutport; out_port_num < endoutport;
> out_port_num++)
>
> nothing will be done. Right?
Right; fixed in your patch.
>
>> + if (attr_mod & 0x20000) {
>> + startinport =
>> ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info) ? 0 : 1;
>> + endinport = osm_node_get_num_physp(p_node);
>> + } else
>> + endinport = startinport = in_port_num;
>
> Ditto with 'inport'.
Ditto.
-- Hal
> Sasha
>
>> +
>> + for (out_port_num = startoutport; out_port_num < endoutport;
>> + out_port_num++) {
>> + p_physp = osm_node_get_physp_ptr(p_node, out_port_num);
>> + for (in_port_num = startinport; in_port_num < endinport;
>> + in_port_num++)
>> + osm_physp_set_slvl_tbl(p_physp, p_slvl_tbl,
>> in_port_num);
>> + }
>>
>> Exit:
>> cl_plock_release(sm->p_lock);
>> diff --git a/opensm/opensm/osm_subnet.c b/opensm/opensm/osm_subnet.c
>> index 09029db..103b5c6 100644
>> --- a/opensm/opensm/osm_subnet.c
>> +++ b/opensm/opensm/osm_subnet.c
>> @@ -354,6 +354,7 @@ static const opt_rec_t opt_tbl[] = {
>> { "daemon", OPT_OFFSET(daemon), opts_parse_boolean, NULL, 0 },
>> { "sm_inactive", OPT_OFFSET(sm_inactive), opts_parse_boolean, NULL, 1
>> },
>> { "babbling_port_policy", OPT_OFFSET(babbling_port_policy),
>> opts_parse_boolean, NULL, 1 },
>> + { "use_optimized_slvl", OPT_OFFSET(use_optimized_slvl),
>> opts_parse_boolean, NULL, 1 },
>> #ifdef ENABLE_OSM_PERF_MGR
>> { "perfmgr", OPT_OFFSET(perfmgr), opts_parse_boolean, NULL, 0 },
>> { "perfmgr_redir", OPT_OFFSET(perfmgr_redir), opts_parse_boolean,
>> NULL, 0 },
>> @@ -713,6 +714,7 @@ void osm_subn_set_default_opt(IN osm_subn_opt_t * p_opt)
>> p_opt->daemon = FALSE;
>> p_opt->sm_inactive = FALSE;
>> p_opt->babbling_port_policy = FALSE;
>> + p_opt->use_optimized_slvl = FALSE;
>> #ifdef ENABLE_OSM_PERF_MGR
>> p_opt->perfmgr = FALSE;
>> p_opt->perfmgr_redir = TRUE;
>> @@ -1499,10 +1501,13 @@ int osm_subn_output_conf(FILE *out, IN
>> osm_subn_opt_t * p_opts)
>> "# SM Inactive\n"
>> "sm_inactive %s\n\n"
>> "# Babbling Port Policy\n"
>> - "babbling_port_policy %s\n\n",
>> + "babbling_port_policy %s\n\n"
>> + "# Use Optimized SLtoVLMapping programming if supported by
>> device\n"
>> + "use_optimized_slvl %s\n\n",
>> p_opts->daemon ? "TRUE" : "FALSE",
>> p_opts->sm_inactive ? "TRUE" : "FALSE",
>> - p_opts->babbling_port_policy ? "TRUE" : "FALSE");
>> + p_opts->babbling_port_policy ? "TRUE" : "FALSE",
>> + p_opts->use_optimized_slvl ? "TRUE" : "FALSE");
>>
>> #ifdef ENABLE_OSM_PERF_MGR
>> fprintf(out,
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
