Eli,
Is there a quick workaround we could put in place? I want to map out our
fabric, and I especially need the spine GUIDs on the GD4200 because I'm
going to be doing up/down routing and want to specify the root GUIDs. I
can also submit a support case to Voltaire, if you think that would make
it go faster. I want to make sure we are using OFED as distributed from OFA.
Tom
On 12/8/2010 11:28 AM, Hal Rosenstock wrote:
Hi Tom,
On 12/8/2010 12:48 PM, Tom Ammon wrote:
Hi,
I get the following when I try to run ibnetdiscover from a server
plugged in to a voltaire 4036 switch. We're using OFED 1.5.2:
[r...@sm1 ~]# ibnetdiscover
src/chassis.c:535; Unexpected node found: guid 0x0008f1050075134c
ibnetdiscover: iberror: failed: discover failed
Looks to me like there's a missing is_spine_4200() clause missing in
get_router_slot in libibnetdisc/src/chassis.c. Eli had added changes to
support the 4200 so he's the best one to comment.
-- Hal
However, ibdiagnet runs fine:
[r...@sm1 ~]# ibdiagnet
Loading IBDIAGNET from: /usr/lib64/ibdiagnet1.5.4
-W- Topology file is not specified.
Reports regarding cluster links will use direct routes.
Loading IBDM from: /usr/lib64/ibdm1.5.4
-I- Using port 1 as the local port.
-I- Discovering ... 277 nodes (23 Switches& 254 CA-s) discovered.
-I---------------------------------------------------
-I- Bad Guids/LIDs Info
-I---------------------------------------------------
-I- No bad Guids were found
-I---------------------------------------------------
-I- Links With Logical State = INIT
-I---------------------------------------------------
-I- No bad Links (with logical state = INIT) were found
-I---------------------------------------------------
-I- General Device Info
-I---------------------------------------------------
-I---------------------------------------------------
-I- PM Counters Info
-I---------------------------------------------------
-W- lid=0x0007 guid=0x0008f105006515ba dev=23131 Port=33
Performance Monitor counter : Value
link_error_recovery_counter : 0xff (overflow)
-W- lid=0x0010 guid=0x0008f10500201d7c dev=23130 Port=14
Performance Monitor counter : Value
symbol_error_counter : 0xffff (overflow)
-W- lid=0x0001 guid=0x0008f10500108a76 dev=23130 Port=30
Performance Monitor counter : Value
symbol_error_counter : 0xffff (overflow)
-I---------------------------------------------------
-I- Fabric Partitions Report (see ibdiagnet.pkey for a full hosts list)
-I---------------------------------------------------
-I- PKey:0x7fff Hosts:254 full:254 limited:0
-I---------------------------------------------------
-I- IPoIB Subnets Check
-I---------------------------------------------------
-I- Subnet: IPv4 PKey:0x7fff QKey:0x00000b1b MTU:2048Byte rate:10Gbps
SL:0x00
-I---------------------------------------------------
-I- Bad Links Info
-I- No bad link were found
-I---------------------------------------------------
----------------------------------------------------------------
-I- Stages Status Report:
STAGE Errors Warnings
Bad GUIDs/LIDs Check 0 0
Link State Active Check 0 0
General Devices Info Report 0 0
Performance Counters Report 0 3
Partitions Check 0 0
IPoIB Subnets Check 0 0
Please see /tmp/ibdiagnet.log for complete log
----------------------------------------------------------------
-I- Done. Run time was 21 seconds.
Any ideas?
Tom
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Tom Ammon
Network Engineer
Office: 801.587.0976
Mobile: 801.674.9273
Center for High Performance Computing
University of Utah
http://www.chpc.utah.edu
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
