Abhilash,
On Tue, Dec 4, 2012 at 5:18 AM, Abhilash Kesavan <a.kesa...@samsung.com> wrote:
> The exynos5250 based chromebooks have a max77686 pmic on i2c channel 0.
> Add support for the pmic in the common cros5250 dts file.
> Tested after enabling cpufreq support for exynos5250 SoC and varying the
> arm frequency/voltage using the userspace governer.
>
> Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
> ---
> Changes since v1:
> * Used generic names for the regulators
> * Changed BUCK5 as being default "ON"
> arch/arm/boot/dts/cros5250-common.dtsi | 138
> ++++++++++++++++++++++++++++++++
> 1 files changed, 138 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi
> b/arch/arm/boot/dts/cros5250-common.dtsi
> index fddd174..8ab8394 100644
> --- a/arch/arm/boot/dts/cros5250-common.dtsi
> +++ b/arch/arm/boot/dts/cros5250-common.dtsi
> @@ -24,6 +24,144 @@
> samsung,i2c-max-bus-freq = <378000>;
> gpios = <&gpb3 0 2 3 0>,
> <&gpb3 1 2 3 0>;
> +
> + max77686@09 {
> + compatible = "maxim,max77686";
> + reg = <0x09>;
> +
> + voltage-regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "P1.0V_LDO_OUT1";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "P1.8V_LDO_OUT2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "P1.8V_LDO_OUT3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.0V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
This matches the signal name on the most recent schematics, which is
good, but I'd be slightly happier if it said "1.1V" in instead of
1.0V. I'd imagine that if we ever rev the schematics that we'd fix
that.
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.35V_BUCK_OUT6";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "P2.0V_BUCK_OUT7";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "P2.85V_BUCK_OUT8";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> + };
> + };
> };
>
> i2c@12C70000 {
> --
> 1.6.6.1
>
...would love to see LDO7 name fixed up, but otherwise looks good to
me. Thanks!
Acked-by: Doug Anderson <diand...@chromium.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
