Alexander,
On Tue, Mar 12, 2013 at 6:09 PM, Alexander Graf <ag...@suse.de> wrote:
> - err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
> - if (err)
> + /* reset pulls the line down, then up again */
> + err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, "ehci_vbus_gpio");
> + if (err) {
> dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
> + return;
> + }
> + mdelay(1);
> + __gpio_set_value(gpio, 1);
> + gpio_free(gpio);
Freeing the gpio is a little on the iffy side since you actually care
about keeping the value. Perhaps you can change this to
devm_gpio_request_one() and avoid the free? I was about to submit a
patch to do just that (since otherwise you run into trouble if you
ever defer the probe) but then ran across your patch.
Thanks!
-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
