This patch adds DT binding documentaton for the Imaging Subsystem
(camera ISP) found on Samsung Exynos4x12 SoCs.

Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---

Changes since v2:
 - added missing clocks at the binding documentation;
 - added clocks/clock-names properties to isp-i2c node.
---
 .../devicetree/bindings/media/exynos4-fimc-is.txt  |   46 ++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/exynos4-fimc-is.txt

diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt 
b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
new file mode 100644
index 0000000..2660cd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
@@ -0,0 +1,46 @@
+Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
+
+The FIMC-IS is a subsystem for processing image signal from an image sensor.
+The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+and SPI bus controllers, PWM and ADC.
+
+fimc-is node
+------------
+
+Required properties:
+- compatible   : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
+                 Exynos4412 SoCs;
+- reg          : physical base address and size of the device memory mapped
+                 registers;
+- interrupts   : must contain FIMC-IS interrupts;
+- clocks       : list of clock specifiers, corresponding to entries in
+                 clock-names property;
+- clock-names  : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
+                 "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart",
+                 "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200",
+                 "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries,
+                 matching entries in the clocks property.
+pmu subnode
+-----------
+
+Required properties:
+ - reg : must contain PMU physical base address and size of the register set.
+
+The following are the FIMC-IS peripheral device nodes and can be specified
+either standalone or as the fimc-is node child nodes.
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible   : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
+                 Exynos4412 SoCs;
+- reg          : physical base address and size of the device memory mapped
+                 registers;
+- clocks       : must contain gate clock specifier for this controller;
+- clock-names  : must contain "i2c_isp" entry.
+
+For the above nodes it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to