Hi Guenter Roeck,
Thanks for reviewing the patch.
On Mon, Nov 18, 2013 at 10:12 PM, Guenter Roeck <li...@roeck-us.net> wrote:
> On Mon, Nov 18, 2013 at 03:19:48PM +0530, Leela Krishna Amudala wrote:
>> Add device tree support for exynos5250 and 5420 SoCs and use syscon regmap
>> interface
>> to configure AUTOMATIC_WDT_RESET_DISABLE and MASK_WDT_RESET_REQUEST
>> registers of PMU
>> to mask/unmask enable/disable of watchdog in probe and s2r scenarios.
>>
>> Signed-off-by: Leela Krishna Amudala <l.kris...@samsung.com>
>> ---
>> .../devicetree/bindings/watchdog/samsung-wdt.txt | 21 ++-
>> drivers/watchdog/Kconfig | 1 +
>> drivers/watchdog/s3c2410_wdt.c | 145
>> ++++++++++++++++++--
>> 3 files changed, 157 insertions(+), 10 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>> b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>> index 2aa486c..5dea363 100644
>> --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>> +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>> @@ -5,10 +5,29 @@ after a preset amount of time during which the WDT reset
>> event has not
>> occurred.
>>
>> Required properties:
>> -- compatible : should be "samsung,s3c2410-wdt"
>> +- compatible : should be one among the following
>> + (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
>> + (b) "samsung,exynos5250-wdt" for Exynos5250
>> + (c) "samsung,exynos5420-wdt" for Exynos5420
>> +
>> - reg : base physical address of the controller and length of memory mapped
>> region.
>> - interrupts : interrupt number to the cpu.
>> +- samsung,syscon-phandle : reference to syscon node (This property required
>> only
>> + in case of compatible being "samsung,exynos5250-wdt" or
>> "samsung,exynos5420-wdt".
>> + In case of Exynos5250 and 5420 this property points to syscon node
>> holding the PMU
>> + base address)
>>
>> Optional properties:
>> - timeout-sec : contains the watchdog timeout in seconds.
>> +
>> +Example:
>> +
>> +watchdog@101D0000 {
>> + compatible = "samsung,exynos5250-wdt";
>> + reg = <0x101D0000 0x100>;
>> + interrupts = <0 42 0>;
>> + clocks = <&clock 336>;
>> + clock-names = "watchdog";
>> + samsung,syscon-phandle = <&pmu_sys_reg>;
>> +};
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index d1d53f3..0d272ae 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -188,6 +188,7 @@ config S3C2410_WATCHDOG
>> tristate "S3C2410 Watchdog"
>> depends on HAVE_S3C2410_WATCHDOG
>> select WATCHDOG_CORE
>> + select MFD_SYSCON if ARCH_EXYNOS5
>> help
>> Watchdog timer block in the Samsung SoCs. This will reboot
>> the system when the timer expires with the watchdog enabled.
>> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
>> index 23aad7c..42e0fd3 100644
>> --- a/drivers/watchdog/s3c2410_wdt.c
>> +++ b/drivers/watchdog/s3c2410_wdt.c
>> @@ -41,6 +41,8 @@
>> #include <linux/slab.h>
>> #include <linux/err.h>
>> #include <linux/of.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>>
>> #define S3C2410_WTCON 0x00
>> #define S3C2410_WTDAT 0x04
>> @@ -61,6 +63,10 @@
>> #define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
>> #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
>>
>> +#define WDT_DISABLE_REG_OFFSET 0x0408
>> +#define WDT_MASK_RESET_REG_OFFSET 0x040c
>> +#define QUIRK_NEEDS_PMU_CONFIG (1 << 0)
>> +
>> static bool nowayout = WATCHDOG_NOWAYOUT;
>> static int tmr_margin;
>> static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
>> @@ -84,6 +90,13 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1
>> to ignore reboots, "
>> "0 to reboot (default 0)");
>> MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
>>
>> +struct s3c2410_wdt_variant {
>> + int disable_reg;
>> + int mask_reset_reg;
>> + int mask_bit;
>> + u32 quirks;
>> +};
>> +
>> struct s3c2410_wdt {
>> struct device *dev;
>> struct clk *clock;
>> @@ -94,7 +107,49 @@ struct s3c2410_wdt {
>> unsigned long wtdat_save;
>> struct watchdog_device wdt_device;
>> struct notifier_block freq_transition;
>> + struct s3c2410_wdt_variant *drv_data;
>> + struct regmap *pmureg;
>> +};
>> +
>> +static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
>> + .quirks = 0
>> +};
>> +
>> +#ifdef CONFIG_OF
>> +static const struct s3c2410_wdt_variant drv_data_exynos5250 = {
>> + .disable_reg = WDT_DISABLE_REG_OFFSET,
>> + .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>> + .mask_bit = 20,
>> + .quirks = QUIRK_NEEDS_PMU_CONFIG
>> +};
>> +
>> +static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
>> + .disable_reg = WDT_DISABLE_REG_OFFSET,
>> + .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>> + .mask_bit = 0,
>> + .quirks = QUIRK_NEEDS_PMU_CONFIG
>> +};
>> +
>> +static const struct of_device_id s3c2410_wdt_match[] = {
>> + { .compatible = "samsung,s3c2410-wdt",
>> + .data = &drv_data_s3c2410 },
>> + { .compatible = "samsung,exynos5250-wdt",
>> + .data = &drv_data_exynos5250 },
>> + { .compatible = "samsung,exynos5420-wdt",
>> + .data = &drv_data_exynos5420 },
>> + {},
>> };
>> +MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
>> +#endif
>> +
>> +static const struct platform_device_id s3c2410_wdt_ids[] = {
>> + {
>> + .name = "s3c2410-wdt",
>> + .driver_data = (unsigned long)&drv_data_s3c2410,
>> + },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
>>
>> /* watchdog control routines */
>>
>> @@ -111,6 +166,26 @@ static inline struct s3c2410_wdt *freq_to_wdt(struct
>> notifier_block *nb)
>> return container_of(nb, struct s3c2410_wdt, freq_transition);
>> }
>>
>> +static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool
>> mask)
>> +{
>> + int ret;
>> + u32 mask_val = 1 << wdt->drv_data->mask_bit;
>> + u32 val = 0;
>> +
>> + if (mask)
>> + val = mask_val;
>> +
>> + ret = regmap_update_bits(wdt->pmureg,
>> + wdt->drv_data->disable_reg,
>> + mask_val, val);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return regmap_update_bits(wdt->pmureg,
>> + wdt->drv_data->mask_reset_reg,
>> + mask_val, val);
>> +}
>> +
>> static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
>> {
>> struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
>> @@ -332,6 +407,20 @@ static inline void s3c2410wdt_cpufreq_deregister(struct
>> s3c2410_wdt *wdt)
>> }
>> #endif
>>
>> +/* s3c2410_get_wdt_driver_data */
>> +static inline struct s3c2410_wdt_variant *
>> +get_wdt_drv_data(struct platform_device *pdev)
>> +{
>> + if (pdev->dev.of_node) {
>> + const struct of_device_id *match;
>> + match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
>> + return (struct s3c2410_wdt_variant *)match->data;
>> + } else {
>> + return (struct s3c2410_wdt_variant *)
>> + platform_get_device_id(pdev)->driver_data;
>> + }
>> +}
>> +
>> static int s3c2410wdt_probe(struct platform_device *pdev)
>> {
>> struct device *dev;
>> @@ -354,6 +443,16 @@ static int s3c2410wdt_probe(struct platform_device
>> *pdev)
>> spin_lock_init(&wdt->lock);
>> wdt->wdt_device = s3c2410_wdd;
>>
>> + wdt->drv_data = get_wdt_drv_data(pdev);
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
>> +
>> "samsung,syscon-phandle");
>> + if (IS_ERR(wdt->pmureg)) {
>> + dev_err(dev, "syscon regmap lookup failed.\n");
>> + return PTR_ERR(wdt->pmureg);
>> + }
>> + }
>> +
>> wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> if (wdt_irq == NULL) {
>> dev_err(dev, "no irq resource specified\n");
>> @@ -444,6 +543,14 @@ static int s3c2410wdt_probe(struct platform_device
>> *pdev)
>> (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
>> (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
>>
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
>> + if (ret < 0) {
>> + dev_err(wdt->dev, "failed to update pmu register");
>
> Hmm ... still not happy ;-). This message is the same for each call
> to s3c2410wdt_mask_and_disable_reset(). Why not create it there ?
> Sure, you'd have to decide if you want to use dev_warn() or dev_err(),
> but that would still be better than repeating the same message (and code)
> five times.
>
> The same is true for the if() statement. It might be worthwhile calling
> s3c2410wdt_mask_and_disable_reset() unconditionally and adding something
> like
>
> if (!(wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG))
> return 0;
>
> to it.
>
As Tomasz Figa suggested I handled the error conditions here
Please go through this link for your reference
https://patchwork.kernel.org/patch/3118771/
Best Wishes,
Leela Krishna.
> Thanks,
> Guenter
>
>> + goto err_cpufreq;
>> + }
>> + }
>> +
>> return 0;
>>
>> err_cpufreq:
>> @@ -459,8 +566,15 @@ static int s3c2410wdt_probe(struct platform_device
>> *pdev)
>>
>> static int s3c2410wdt_remove(struct platform_device *dev)
>> {
>> + int ret;
>> struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
>>
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>> + if (ret < 0)
>> + dev_warn(wdt->dev, "failed to update pmu register");
>> + }
>> +
>> watchdog_unregister_device(&wdt->wdt_device);
>>
>> s3c2410wdt_cpufreq_deregister(wdt);
>> @@ -473,8 +587,15 @@ static int s3c2410wdt_remove(struct platform_device
>> *dev)
>>
>> static void s3c2410wdt_shutdown(struct platform_device *dev)
>> {
>> + int ret;
>> struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
>>
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>> + if (ret < 0)
>> + dev_warn(wdt->dev, "failed to update pmu register");
>> + }
>> +
>> s3c2410wdt_stop(&wdt->wdt_device);
>> }
>>
>> @@ -482,12 +603,19 @@ static void s3c2410wdt_shutdown(struct platform_device
>> *dev)
>>
>> static int s3c2410wdt_suspend(struct device *dev)
>> {
>> + int ret;
>> struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
>>
>> /* Save watchdog state, and turn it off. */
>> wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
>> wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
>>
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>> + if (ret < 0)
>> + dev_warn(wdt->dev, "failed to update pmu register");
>> + }
>> +
>> /* Note that WTCNT doesn't need to be saved. */
>> s3c2410wdt_stop(&wdt->wdt_device);
>>
>> @@ -496,6 +624,7 @@ static int s3c2410wdt_suspend(struct device *dev)
>>
>> static int s3c2410wdt_resume(struct device *dev)
>> {
>> + int ret;
>> struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
>>
>> /* Restore watchdog state. */
>> @@ -503,6 +632,12 @@ static int s3c2410wdt_resume(struct device *dev)
>> writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count
>> */
>> writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
>>
>> + if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>> + ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
>> + if (ret < 0)
>> + dev_warn(wdt->dev, "failed to update pmu register");
>> + }
>> +
>> dev_info(dev, "watchdog %sabled\n",
>> (wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
>>
>> @@ -513,18 +648,11 @@ static int s3c2410wdt_resume(struct device *dev)
>> static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
>> s3c2410wdt_resume);
>>
>> -#ifdef CONFIG_OF
>> -static const struct of_device_id s3c2410_wdt_match[] = {
>> - { .compatible = "samsung,s3c2410-wdt" },
>> - {},
>> -};
>> -MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
>> -#endif
>> -
>> static struct platform_driver s3c2410wdt_driver = {
>> .probe = s3c2410wdt_probe,
>> .remove = s3c2410wdt_remove,
>> .shutdown = s3c2410wdt_shutdown,
>> + .id_table = s3c2410_wdt_ids,
>> .driver = {
>> .owner = THIS_MODULE,
>> .name = "s3c2410-wdt",
>> @@ -540,4 +668,3 @@ MODULE_AUTHOR("Ben Dooks <b...@simtec.co.uk>, "
>> MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
>> MODULE_LICENSE("GPL");
>> MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
>> -MODULE_ALIAS("platform:s3c2410-wdt");
>> --
>> 1.7.10.4
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
