On 02/04/14 09:50, Pankaj Dubey wrote:
> From: Young-Gun Jang <yg1004.j...@samsung.com>
>
> Add support for mapping Exynos Power Management Unit (PMU) base address
> from device tree. Code will use existing samsung pmu binding information.
> This patch also adds "get_exynos_pmubase" a helper function to return mapped
> base
> address to various other files under "mach-exynos".
>
> Signed-off-by: Young-Gun Jang <yg1004.j...@samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.du...@samsung.com>
> ---
> arch/arm/mach-exynos/common.h | 2 ++
> arch/arm/mach-exynos/exynos.c | 44
> +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 46 insertions(+)
>
[...]
> #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index a5e1349..a5127fb 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -35,6 +35,8 @@
> #define L2_AUX_VAL 0x7C470001
> #define L2_AUX_MASK 0xC200ffff
>
> +static void __iomem *exynos_pmu_base __initdata;
> +
> static struct map_desc exynos4_iodesc[] __initdata = {
> {
> .virtual = (unsigned long)S3C_VA_SYS,
> @@ -245,6 +247,47 @@ void __init exynos_init_late(void)
> exynos_pm_init();
> }
>
> +static char const *exynos_dt_pmu_match[] __initconst = {
> + "samsung,exynos4210-pmu",
> + "samsung,exynos4212-pmu",
> + "samsung,exynos4412-pmu",
> + "samsung,exynos5250-pmu",
> + NULL
> +};
> +
> +static int __init exynos_fdt_map_pmu(unsigned long node,
> + const char *uname, int depth, void *data)
> +{
> + struct map_desc iodesc;
> + __be32 *reg;
> + unsigned long len;
> +
> + if (of_flat_dt_match(node, exynos_dt_pmu_match)) {
> + phys_addr_t phys_addr;
> + reg = of_get_flat_dt_prop(node, "reg", &len);
> + if (reg == NULL || len != (sizeof(unsigned long) * 2))
> + return 0;
> +
> + phys_addr = be32_to_cpu(reg[0]);
> + iodesc.pfn = __phys_to_pfn(phys_addr);
> + iodesc.length = be32_to_cpu(reg[1]) - 1;
> + iodesc.virtual = (unsigned long)S5P_VA_PMU;
> + iodesc.type = MT_DEVICE;
> + iotable_init(&iodesc, 1);
Are you sure...you need this in addition to ioremap() below ?
Can't you just use the Linux syscon API ?
There were some patches posted for syscon to make it available in earlier
system initialization stage: https://lkml.org/lkml/2014/2/19/218
> + exynos_pmu_base = ioremap(phys_addr, be32_to_cpu(reg[1]));
> + if (WARN_ON(!exynos_pmu_base))
> + return -EFAULT;
> + }
> +
> + return 0;
> +}
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
