On 12.10.2015 00:46, Anand Moon wrote:
> From: Jaehoon Chung <jh80.ch...@samsung.com>
>
> To detect sd-card use the cd-gpio method.
> It can decrease the interrupt for detecting sd-card.
>
> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
> Signed-off-by: Anand Moon <linux.am...@gmail.com>
>
> ---
> Changes based on
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> v4.4-next/dt-samsung branch
> ---
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 1af5bdc..26decbd 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -352,8 +352,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + cd-gpios = <&gpc2 2 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
Anand,
You essentially reverted here af6ad88acbd6 ("ARM: dts: Mux XMMCnDATA[0]
pad correctly for Exynos5420 boards"). Why? There is no explanation in
the commit message about this.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
