2015년 11월 20일 19:59에 Inki Dae 이(가) 쓴 글: > Hi Javier, > > 2015년 11월 20일 00:51에 Javier Martinez Canillas 이(가) 쓴 글: >> On 11/19/2015 11:55 AM, Javier Martinez Canillas wrote: >>>>> >>>> >>>> This series causes a boot failure on at least an Exynos5800 Peach Pi >>>> Chromebook (tested myself) and seems to be the cause of other Exynos >>>> boards failing to boot: http://kernelci.org/boot/?exynos&fail >>>> >>>> [snip] >>>> >>>>> drm/exynos: add pm_runtime to Mixer >>>>> drm/exynos: add pm_runtime to FIMD >>>> >>>> I had to revert these patches in order to get the machine in a bootable >>>> state again, the sha1 hash for these patches in next-20151119 are: >>>> >>>> 045febd5f813 drm/exynos: add pm_runtime to FIMD >> >> On a closer look, only reverting the FIMD patch is enough >> to make at least the Exynos5800 Peach Pi to boot again. > > Thanks for report. > > I assume that the issue is because above patch removed 'suspended' variable > for checking the suspend status in runtime so I revived it. > > I'm not sure that the change could resolve the issue. Could you test it > with the change again? I have no Exynos5800 Peach Pi board. :( > > For this, I pushed it to below exynos-drm/for-next branch, > > https://git.kernel.org/cgit/linux/kernel/git/daeinki/drm-exynos.git/commit/?h=exynos-drm/for-next&id=e84f43e2b2c3388694b0b3a58c2c4447f1fbae7c > > If the issue is resolved by the change then I will modify other patches for > DECON series. And if really so, there may be a corner case we missed.
Oops, I found out one error at the boot log, http://storage.kernelci.org/next/next-20151120/arm-multi_v7_defconfig+CONFIG_LKDTM=y/lab-collabora/boot-exynos5800-peach-pi.html The boot log says, [ 5.754493] vdd_ldo9: supplied by vdd_2v [ 5.765510] of_graph_get_next_endpoint(): no port node found in /dp-controller@145B0000 Seems this error is because exynos5800-peach-pit.dts file doesn't have 'ports' node in dp node. Below is dp node description of exynos5420-peach-pit.dts file. &dp { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { port@0 { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; }; }; }; And below is for exynos5800-peash-pit.dts, &dp { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; panel = <&panel>; }; Thanks, Inki Dae > > Thanks, > Inki Dae > >> >> Best regards, >> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
