Tarball, rpm and deb can be found on http://www.torque.net/sg .
Overview of sg3_utils, sg_utils and other packages are on
this page: http://www.torque.net/sg/u_index.html
A release announcement has been sent to freshmeat.net .
Changelog for sg3_utils-1.12 [20050121]
- sg_wr_mode: new utility to modify (i.e. write to) mode pages
- sg_reassign: new utility: issues Reassign Blocks command
- sg_rtpg: new utility: issues Report Target Port Groups command
[Christophe Varoqui]
- ATA IDENTIFY command misspelt as "IDENTITY" in several places
- sginfo: tweak SAS mode pages to match sas 1.1 rev 07
- add NV_DIS bit to disk caching mode page
- sg_map: open /dev/nst* rather than /dev/st* (to stop
spurious rewinds)
- sg_lib: ATA return sense descriptor
- add sg_get_sense_info_fld() to fetch info field from
sense data
- fix bug in sg_scsi_sense_desc_find()
- add sense key specific decoding for fixed format sense data
- sg_modes: extend '-p' option to allow
'-p=<page_code>,<subpage_code>'
- add '-A' option to output all mode pages and subpages
- extend '-l' option to show subpages, selected command
set pages
- sg_inq: fix LUN WWN output in unit path report VPD page (emc)
[Hergen Lange]
- sg_get_config: some additions for DVD-R dual layer
- sg_modes: show write protect (WP) and DpoFua flags for disks
- sg_cmds: add llbaa argument to sg_ll_mode_sense10()
Command coverage
================
The following table lists SCSI commands in alphabetical order on the
left and the sg3_utils utilities that implement invocations of them
on the right. The second table lists supported ATA commands.
SCSI command sg3_utils utilities that use this SCSI command
------------ ----------------------------------------------
GET CONFIGURATION sg_get_config
INQUIRY sg_inq, sginfo, sg_logs, sg_map('-i'), sg_modes,
sg_opcodes, sg_persist, sg_scan, sg_ses
LOG SELECT sg_logs('-r')
LOG SENSE sg_logs
MODE SELECT(6) sg_wr_mode, sginfo, sg_emc_trespass
MODE SELECT(10) sg_wr_mode, sginfo, sg_emc_trespass
MODE SENSE(6) sg_modes, sg_wr_mode, sginfo, sg_senddiag('-e')
MODE SENSE(10) sg_modes, sg_wr_mode, sginfo, sg_senddiag('-e')
PERSISTENT IN sg_persist
PERSISTENT OUT sg_persist
PREVENT ALLOW MEDIUM REMOVAL sg_prevent
READ(6) sg_dd, sgm_dd, sgp_dd, sg_read
READ(10) sg_dd, sgm_dd, sgp_dd, sg_read
READ(12) sg_dd, sgm_dd, sgp_dd, sg_read
READ(16) sg_dd, sgm_dd, sgp_dd, sg_read
READ BUFFER sg_rbuf, sg_test_rwbuf
READ CAPACITY(10) sg_readcap, sg_dd, sgm_dd, sgp_dd
READ CAPACITY(16) sg_readcap, sg_dd, sgm_dd, sgp_dd
READ DEFECT(10) sginfo
READ DEFECT(12) sginfo
READ LONG sg_read_long
REASSIGN BLOCKS sg_reassign
RECEIVE DIAGNOSTIC sg_senddiag, sg_ses
REPORT LUNS sg_luns
REPORT SUPPORTED OPERATION CODES sg_opcodes
REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS sg_opcodes
REPORT TARGET PORT GROUPS sg_rtpg
REQUEST SENSE sg_requests
SEND DIAGNOSTIC sg_senddiag, sg_ses
START STOP sg_start
SYNCHRONIZE CACHE sg_sync, sg_dd, sgm_dd, sgp_dd
TEST UNIT READY sg_turs
VERIFY(10) sg_verify
WRITE(6) sg_dd, sgm_dd, sgp_dd
WRITE(10) sg_dd, sgm_dd, sgp_dd
WRITE(12) sg_dd, sgm_dd, sgp_dd
WRITE(16) sg_dd, sgm_dd, sgp_dd
WRITE BUFFER sg_test_rwbuf
WRITE LONG sg_write_long
ATA command sg3_utils utilities that use this SCSI command
----------- ----------------------------------------------
IDENTIFY sg_inq, sg_scan
Doug Gilbert
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
