On Wed, Sep 26 2007 at 3:00 +0200, James Bottomley <[EMAIL PROTECTED]> wrote: > Andrew asked that I provide a status report of pending updates. The > list is attached below. It's pretty much driver updates and minor bug > fixes. The main functionality changes are Kay's sysfs updates and the > shift of the ULD attachement towards the block prep function. > > James > > --- > > > Adrian Bunk (2): > make scsi_decode_sense_buffer and scsi_decode_sense_extras static > scsi_error.c should #include "scsi_transport_api.h" > > Alan Cox (3): > dtc: Fix typo > eata_pio: Clean up proc handling, bracketing and use cpu_relax() > dtc: clean up indent damage and add printk levels > > Andrew Morton (3): > ips: warning fix > aacraid: rename check_reset > bsg: declare structures for the non BSG case > > Andrew Vasquez (15): > qla2xxx: Update version number to 8.02.00-k4. > qla2xxx: Limit iIDMA speed adjustments. > qla2xxx: Rework MSI-X handlers. > qla2xxx: Clear options-flags while staging firmware-execution. > qla2xxx: Sparse cleanups in qla_mid.c > qla2xxx: Cleanup several 'sparse' warnings. > qla2xxx: Use shost_priv(). > qla2xxx: Remove unused member (list) from srb_t structure. > qla2xxx: Use the correct pointer-address during NVRAM writes. > qla2xxx: Set correct attribute count during FDMI RPA. > qla2xxx: Query additional RISC registers during ISP25XX firmware dump. > qla2xxx: Correct staging of RISC while attempting to pause. > qla2xxx: Query additional RISC information during a pause. > qla2xxx: Add flash burst-read/write support. > qla2xxx: Collapse and simplify ISP2XXX firmware dump routines. > > Bartlomiej Zolnierkiewicz (1): > MAINTAINERS: mark ide-scsi as Orphan > > Bernhard Walle (1): > ips: Update version information > > Boaz Harrosh (2): > ide-scsi.: convert to data accessors and !use_sg cleanup > microtek: use data accessors and !use_sg cleanup > > Christof Schmitt (5): > zfcp: Enable debug feature before setting adapter online > scsi_transport_fc: Introduce disable_target_scan flag > zfcp: Remove braces for only one statement > zfcp: Remove unnecessary assignment > zfcp: correct indentation for nested if-else > > David Miller (1): > esp: fix instance numbering. > > David Woodhouse (1): > Fix ibmvscsi client for multiplatform iSeries+pSeries kernel > > Eric Moore (10): > MAINTAINERS : mpt fusion mailing list change > mpt fusion: bump version to 3.04.06 > mpt fusion: Kconfig cleanup > mpt fusion: removing Dell copyright > mpt fusion: removing references to hd->ioc > mpt fusion: rename vdev to vdevice > mpt fusion: adding/removing white space > mpt fusion: standardize printks and debug info > mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030 > Addition to pci_ids.h for ATTO Technology, Inc. > > FUJITA Tomonori (17): > srp_transport: convert to use supported_mode attribute > fc_transport: add target driver support > add supported_mode and active_mode attributes to the host > tgt: fix can_queue bug > fc4: convert to use the data buffer accessors > sg: increase sglist_len of the sg_scatter_hold structure > ps3rom: convert to use the data buffer accessors > scsi_transport_srp: remove tgt dependencies > tgt: convert ibmvstgt to use transport tsk_mgmt_response callback > tgt: move tsk_mgmt_response callback to transport class > tgt: convert libsrp and ibmvstgt to use srp_transport > srp_transport: add target driver support > tgt: add I_T nexus support > transport_srp: add rport roles attribute > ib_srp: convert to use the srp transport class > ibmvscsi: convert to use the srp transport class > add srp transport class > > Gabriel C (1): > NCR5380: fix NCR53C400_PSEUDO_DMA is not defined > > Gilbert Wu (1): > aic94xx: Add new PCI ID for ASC58300 > > Heiko Carstens (3): > zfcp: avoid if (whatever) ; constructs. > zfcp: allocate gid_pn_data objects from gid_pn_cache. > zfcp: fix memory leak. > > HighPoint Linux Team (1): > hptiop: adding new firmware interface and more PCI device IDs > > James Bottomley (3): > sg: use idr to replace static arrays > move ULD attachment into the prep function > arcmsr: fix compile problems > > Jan Engelhardt (1): > mpt fusion: Use menuconfig objects > > Jeff Garzik (2): > arcmsr: irq handler fixes, cleanups, micro-opts > arcmsr: Fix hardware wait loops > > Jesper Juhl (3): > mpt fusion: fix two potential mem leaks > NCR_D700, lpfc: Clean up duplicate includes > lpfc: fix potential overflow of hbqs array > > Joe Carnuccio (1): > qla2xxx: Allow region-based flash-part accesses. > > Kay Sievers (1): > switch sdev sysfs attributes to default attributes > > Mariusz Kozlowski (3): > mpt fusion: remove redundant memset > mpt fusion: mostly kmalloc + memset conversion to kzalloc > kmalloc + memset conversion to kzalloc > > Masatake YAMATO (1): > Fix signness of parameters in scsi module > > Matthew Wilcox (49): > ips: Close narrow race in release > aic94xx: Free scsi host on error > simscsi: Free scsi host on error > qlogicfas: Close narrow race in release > aha152x: Close narrow race in release > ncr53c8xx: Call scsi_host_put in release > ide-scsi: Close narrow race in release > ibmmca: Stop leaking scsi_hosts on exit > scsi_scan: Cope with kthread_run failing > Improve error message when offlining a device > advansys: Use DRV_NAME > advansys: Comment/indentation/macro cleanup > advansys: Remove some custom wrappers > advansys: Remove a check for an impossible condition > advansys: Support 16-byte commands properly > advansys: Enable interrupts earlier in queuecommand > advansys: Remove `active' queue and all remaining internal queueing code > advansys: Remove `done' queue > advansys: Remove a check for an impossible condition > advansys: Remove `waiting' queue > advansys: Shrink advansys_board_found a little more > advansys: Reformat microcode > advansys: Create AdvLoadMicrocode > advansys: Create AdvBuildCarrierFreelist > advansys: Fix VLB driver name > advansys: Move documentation to Documentation/scsi > advansys: use memcpy instead of open-coded loop > advansys: Remove pci_slot_info > advansys: Remove library-style callback routines > advansys: Move struct device out of the cfg structures > advansys: Stop using n_io_port in Scsi_Host structure > advansys: ioremap no longer needs page-aligned addresses > advansys: delete AscGetChipBusType > advansys: misc reformatting > advansys: remove INQUIRY sniffing > Add QUANTUM XP34301 to the blacklist > advansys: remove AscCompareString() > advansys: More PCI cleanups > advansys: Update resource management > advansys: Convert to ISA driver model > advansys: Convert to EISA driver model > advansys: Convert to PCI driver model > advansys: Move to scsi hotplug initialisation model > advansys: Make advansys_board_found a little more readable > advansys: Stop checking the scsi_cmnd belongs to our Scsi_Host > advansys: Improve interrupt handler > advansys: Clean up proc_info implementation > advansys: undate version, copyright, etc > Fix async scanning double-add problems > > Matthias Kaehlcke (1): > osst: Use mutex instead of semaphore > > Michael Reed (1): > stale residual returned on write following BUSY retry > > Mike Christie (1): > fix write buffer length in scsi_req_map_sg() > > Nick Cheng (1): > arcmsr: 1.20.00.15: add SATA RAID plus other fixes > > Prakash, Sathya (5): > mpt fusion: Change company name from LSI Logic to LSI > mpt fusion: Link speed change display support > mpt fusion: Creation of mptsas.h header file > mpt fusion: Change call back indices to u8 from int > mpt fusion: Usage of high priority request FIFO to send task management > commands > > Ravi Anand (1): > qla2xxx: Correct infinite-login-retry issue. > > Salyzyn, Mark (1): > aacraid: Add documentation for new Adaptec, SMC and SUN cards > > Seokmann Ju (2): > qla2xxx: Retrieve max-NPIV support capabilities from FW. > qla2xxx: Add PCI error recovery support. > > Swen Schillig (2): > zfcp: whitespace cleanup > zfcp: cleanup, separation of ERP, non ERP-version for exchange_ > functions >
Will you not have time to review the scsi_error patches? They are independent of the drivers, and will enable usb patches to go threw their maintainer tree. They establish a new API and fix a minor bug. Boaz - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
