From: Dave Maurer <david.c.mau...@intel.com>
The following patch is a fix for the WD workaround
COMSAS negation timeout change. This patch disables the
OOB SM when the OOB is placed in reset, which allows
the updated COMSAS negation timeout value to take
effect.
Cc: Dan Thompson <daniel.j.thomp...@intel.com>
Reported-by: Dan Thompson <daniel.j.thomp...@intel.com>
Signed-off-by: Dave Maurer <david.c.mau...@intel.com>
Signed-off-by: Dan Williams <dan.j.willi...@intel.com>
---
drivers/scsi/isci/phy.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 18f43d4..ebb8f53 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -1205,6 +1205,7 @@ static void scu_link_layer_start_oob(struct isci_phy
*iphy)
/** Reset OOB sequence - start */
val = readl(&ll->phy_configuration);
val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE) |
SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
writel(val, &ll->phy_configuration);
readl(&ll->phy_configuration); /* flush */
@@ -1236,6 +1237,7 @@ static void scu_link_layer_tx_hard_reset(
* to the starting state. */
phy_configuration_value =
readl(&iphy->link_layer_registers->phy_configuration);
+ phy_configuration_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
phy_configuration_value |=
(SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
