Hi,
I have 3 boxes, each with an LSI 9211-8i and a mix of LSI expanders (Supermicro
SAS-846EL2, SAS-826EL2). For some of my expanders, 'sg_ses -j' (originally
sg3_utils 1.33, now 1.35) is showing:
Slot 24 [0,23] Element type: Array device slot
...
Additional Element Status:
Transport protocol: Oxc not decoded
...where the slot contains a SATA device. It's always Slot 24, and other
slots show up fine. E.g. on one of the expanders with SATA drives in
both Slot 23 and 24:
h3# sg_ses -j /dev/sg81
LSI SAS2X36 0e0b
Primary enclosure logical identifier (hex): 500304800013453f
...
Slot 23 [0,22] Element type: Array device slot
Enclosure Status:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Additional Element Status:
Transport protocol: SAS
number of phys: 1, not all phys: 0, device slot number: 22
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x500304800013453f
SAS address: 0x5003048000134522
phy identifier: 0x0
Slot 24 [0,23] Element type: Array device slot
Enclosure Status:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Additional Element Status:
Transport protocol: Oxc not decoded
...
This may be unrelated, but 'sg_ses -j' is also coming up with the
following error on 3 of the 6 expanders identified as "LSI SAS2X36 0e0b"
(this doesn't include any of the expanders with the Slot 24 problem):
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
The expander types are:
----------------------------------------------------------------------
$ for h in h1 h2 h3; do echo "=== $h ==="
ssh $h 'lsscsi | grep enclosu'
done
=== h1 ===
[0:0:24:0] enclosu LSI CORP SAS2X36 0717 -
[0:0:27:0] enclosu LSI SAS2X36 0e0b -
[0:0:38:0] enclosu LSI CORP SAS2X28 0717 -
[0:0:62:0] enclosu LSI SAS2X36 0e0b -
[0:0:85:0] enclosu LSI SAS2X36 0e0b -
=== h2 ===
[0:0:25:0] enclosu LSI CORP SAS2X36 0717 -
[0:0:29:0] enclosu LSI CORP SAS2X28 0717 -
=== h3 ===
[0:0:23:0] enclosu LSI CORP SAS2X36 0717 -
[0:0:45:0] enclosu LSI SAS2X36 0e0b -
[0:0:57:0] enclosu LSI CORP SAS2X28 0717 -
[0:0:81:0] enclosu LSI SAS2X36 0e0b -
[0:0:88:0] enclosu LSI SAS2X36 0e0b -
----------------------------------------------------------------------
...and they're daisy-chained like this:
----------------------------------------------------------------------
for h in b2 b4 b5; do echo "=== $h ==="
ssh $h 'find /sys/bus/scsi/devices/host0/ -name expander\* | egrep -v
"bsg|sas_(expander|device)"'
done
=== h1 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1/port-0:1:25/expander-0:4
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3
=== h2 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:1/expander-0:1
=== h3 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3/port-0:3:0/expander-0:4
----------------------------------------------------------------------
(Sorry, I don't know how to relate the /sys/bus/scsi stuff to the scsi ids or
/dev/sgXX.)
The errors are showing up like:
----------------------------------------------------------------------
$ for h in h1 h2 h3; do
ssh $h '
for d in $(lsscsi -tg | awk "\$2 == \"enclosu\" { print \$5 }"); do
echo "=== $(hostname):$d ==="
sg_ses -j $d 2>&1
done
'
done | egrep 'LSI|^=|^Slot 24|join_work|not decoded' | sed -r 's/^=/\n=/'
=== h1:/dev/sg24 ===
LSI CORP SAS2X36 0717
Slot 24 [0,23] Element type: Array device slot
=== h1:/dev/sg27 ===
LSI SAS2X36 0e0b
Slot 24 [0,23] Element type: Array device slot
Transport protocol: Oxc not decoded
=== h1:/dev/sg38 ===
LSI CORP SAS2X28 0717
=== h1:/dev/sg62 ===
LSI SAS2X36 0e0b
Slot 24 [0,23] Element type: Array device slot
Transport protocol: Oxc not decoded
=== h1:/dev/sg81 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
LSI SAS2X36 0e0b
=== h2:/dev/sg25 ===
LSI CORP SAS2X36 0717
Slot 24 [0,23] Element type: Array device slot
=== h2:/dev/sg29 ===
LSI CORP SAS2X28 0717
=== h3:/dev/sg23 ===
LSI CORP SAS2X36 0717
Slot 24 [0,23] Element type: Array device slot
=== h3:/dev/sg45 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
LSI SAS2X36 0e0b
=== h3:/dev/sg57 ===
LSI CORP SAS2X28 0717
=== h3:/dev/sg81 ===
LSI SAS2X36 0e0b
Slot 24 [0,23] Element type: Array device slot
Transport protocol: Oxc not decoded
=== h3:/dev/sg88 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
LSI SAS2X36 0e0b
----------------------------------------------------------------------
What should I be looking at, or what info I can provide to help track down
these issues?
Cheers,
Chris.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
