From: Viswas G <viswa...@pmcs.com>
Thermal page code has been changed to 7 for the 12G controllers.
Changes From V1:
None
Signed-off-by: Viswas G <viswa...@pmcs.com>
Reviewed-by: Suresh Thiagarajan <suresh.thiagara...@pmcs.com>
Reviewed-by: Hannes Reinecke <h...@suse.com>
Reviewed-by: Jack Wang <jinpu.w...@profitbricks.com>
Reviewed-by: Tomas Henzl <the...@redhat.com>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 9 ++++++++-
drivers/scsi/pm8001/pm80xx_hwi.h | 3 ++-
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 05cce46..dced9f7 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -843,6 +843,7 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
int rc;
u32 tag;
u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+ u32 page_code;
memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -851,8 +852,14 @@ pm80xx_set_thermal_config(struct pm8001_hba_info
*pm8001_ha)
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = cpu_to_le32(tag);
+
+ if (IS_SPCV_12G(pm8001_ha->pdev))
+ page_code = THERMAL_PAGE_CODE_7H;
+ else
+ page_code = THERMAL_PAGE_CODE_8H;
+
payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
- (THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+ (THERMAL_ENABLE << 8) | page_code;
payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 9970a38..a083cc6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -177,7 +177,8 @@
/* Thermal related */
#define THERMAL_ENABLE 0x1
#define THERMAL_LOG_ENABLE 0x1
-#define THERMAL_OP_CODE 0x6
+#define THERMAL_PAGE_CODE_7H 0x6
+#define THERMAL_PAGE_CODE_8H 0x7
#define LTEMPHIL 70
#define RTEMPHIL 100
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
