On Monday 26 September 2016, Finn Thain wrote:
[...]
> Instead of this:
> > + if (scsi_add_host(instance, pdev)) {
> > + free_irq(irq, instance);
> > + goto out_unregister;
> > + }
> > + scsi_scan_host(instance);
> > + return instance;
>
> please use the following (note the missing NCR5380_exit() call):
>
> + if (scsi_add_host(instance, pdev))
> + goto out_free_irq;
> + scsi_scan_host(instance);
> + return(instance);
> +
> +out_free_irq:
> + if (instance->irq != NO_IRQ)
> + free_irq(instance->irq, instance);
> + NCR5380_exit(instance);
>
> > out_unregister:
> > - scsi_unregister(instance);
> > + scsi_host_put(instance);
> > out_release:
> > #ifndef SCSI_G_NCR5380_MEM
> > - release_region(card.NCR5380_map_name, region_size);
> > + release_region(base, region_size);
> > #else
> > iounmap(iomem);
> > release_mem_region(base, iomem_size);
> > #endif
> > - return 0;
> > + return NULL;
> > }
> >
> > -/**
> > - * generic_NCR5380_release_resources - free resources
> > - * @instance: host adapter to clean up
> > - *
> > - * Free the generic interface resources from this adapter.
> > - *
> > - * Locks: none
> > - */
> > -
> > -static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
> > +static void generic_NCR5380_release_resources(struct Scsi_Host
> > *instance) {
> > + scsi_remove_host(instance);
> > if (instance->irq != NO_IRQ)
> > free_irq(instance->irq, instance);
> > NCR5380_exit(instance);
> > @@ -364,7 +304,7 @@ static int generic_NCR5380_release_resources(struct
> > Scsi_Host *instance) release_mem_region(instance->base,
> > hostdata->iomem_size);
> > }
> > #endif
> > - return 0;
> > + scsi_host_put(instance);
>
> The sequence of operations here should be the same as the error path
> above.
I put scsi_host_put() call at the end because the release_mem_region code (in
the MMIO case) dereferences the hostdata pointer. I don't think it's safe to
do after scsi_host_put().
[...]
> > +static int pnp_registered;
> > +#endif /* !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP) */
> > +
> > +static int __init generic_NCR5380_init(void)
> > +{
> > + int ret = 0;
> > +
> > +#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
> > + ret = pnp_register_driver(&generic_NCR5380_pnp_driver);
> > + if (!ret)
> > + pnp_registered = 1;
> > #endif
> > + ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS);
> > + if (!ret)
> > + isa_registered = 1;
> > +
> > +#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
> > + if (pnp_registered)
> > + ret = 0;
> > +#endif
> > + if (isa_registered)
> > + ret = 0;
> > +
> > + return ret;
> > +}
> > +
> > +static void __exit generic_NCR5380_exit(void)
> > +{
> > +#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
> > + if (pnp_registered)
> > + pnp_unregister_driver(&generic_NCR5380_pnp_driver);
> > +#endif
> > + if (isa_registered)
> > + isa_unregister_driver(&generic_NCR5380_isa_driver);
> > +}
> > +
>
> I find that hard to follow. This should be equivalent and simpler:
>
> static int __init generic_NCR5380_init(void)
> {
> isa_ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS);
> #if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
> pnp_ret = pnp_register_driver(&generic_NCR5380_pnp_driver);
> return pnp_ret ? isa_ret : 0;
> #endif
> return isa_ret;
> }
>
> static void __exit generic_NCR5380_exit(void)
> {
> if (!isa_ret)
> isa_unregister_driver(&generic_NCR5380_isa_driver);
> #if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
> if (!pnp_ret)
> pnp_unregister_driver(&generic_NCR5380_pnp_driver);
> #endif
> }
Doesn't make it any better, IMHO. Good that it's shorter but not cleaner -
especially this:
> return pnp_ret ? isa_ret : 0;
Also looking at the _exit function, meaning of isa_ret and pnp_ret is not
obvious there.
Maybe we should have a module_isa_pnp_driver() macro.
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
